Jump to content

dpmiller

Members
 View Profile  See their activity

  • Posts

    4453

  • Joined

  • Last visited

  • Days Won

    4

 Content Type 

Everything posted by dpmiller

  1. dpmiller
    string and staples.
  2. dpmiller
    Some DNOs (NIE) prefer a front corner position for the meter to assist the readers, you'd have to fight pretty hard to get anything other than A unless you go for a kiosk.
  3. dpmiller
    did you try removing the knob and turning the spindle down farther?
  4. dpmiller
    Any chance the cavity is bridged at or above floor level?
  5. dpmiller
    Is the height like that to allow service access to the cistern?
  6. dpmiller
    As the real issue is fire protection I'd be looking to solidly building in those voids with block, personally?
  7. dpmiller
    I can't C&P from the warranty document but what is *actually* says is "the Product has been installed by a competent person who is suitably qualified to carry out plumbing and electrical work"
  8. dpmiller
    as mentioned elsewhere this gap at ceiling level is more of an issue and addressing this will probably make more difference to the acoustics than PB...
  9. dpmiller
    ^yep
  10. dpmiller
    I haven't had an airtightness test done yet. But there needs to be a number typed into your design SAP- what was it?
  11. dpmiller
    no smart meters in NI, and not much choice in terms of infrastructure workers. NIE Networks do cables AND meters, regardless of your supplier...
  12. dpmiller
    I bought a s/h dewalt cordless hedge trimmer a few months back and it's very good, just as capable as the petrol one. I've still got a petrol 4-in one for extended reach stuff tho. When I can use all the tools I have already on a cordless power unit them I'm listening...
  13. dpmiller
    There's a massive range of TF providers local to us, and while some of them certainly aim at the developer market, none of them do design and kit supply quite the way many of the Scottish firms do. Every job is a one-off and there are plenty of choices within each company as to what insulation and airtightness levels you might choose to aim for.
  14. dpmiller
    I'm not a fan of edging, I prefer just to wipe a fillet of grout around the periphery.
  15. dpmiller
    how close can this kind of cable run together?
  16. dpmiller
    We've a turntable-less Panasonic inverter combi- micro/grill/ fan oven, NNCF760. Superb bit of kit- grills and microwaves evenly, and the programs do a great job for pizza and jacket spuds. Warms up quick as an oven too...
  17. dpmiller
    the MIs for mine stated to keep it bagged til all building works were complete, anyway.
  18. dpmiller
    What did the plans show, and what is your BCO happy with?
  19. dpmiller
    standard trench fill for us, blocks on flat up from that, subfloors poured over blinded hardcore *inside* the blockwork. One course of block above that to FFL and TF kit nailed and strapped onto it. Pics in my build thread...
  20. dpmiller
    you don't like a bit of heat in your red?
  21. dpmiller
    Clive didn't mention any other insulation?
  22. dpmiller
    Yes.
  23. dpmiller
    AC knows no polarity
  24. dpmiller
    is the pin spacing not the same as an ordinary figure-8 plug?
  25. dpmiller
    could even go phenolic instead of PIR
×
×
  • Create New...