dpmiller

is that the flow or return temp?

Are there no thermo mixers on the manifolds?

I'm personally not convinced that an accessible isolator for fridges and freezers is a good thing. Too easy to have a smelly expensive oopsie...

@ProDave how do you look after a lollipop on the EIC? Just ignore the "stick" and pretend it's a normal ring final?

Are palm nailers not frowned upon now because of the vibration?

recovery services with government contracts certainly do need secure storage.

Quick and easy Q. for the gurus- does anyone know of a flipper panel that is less than 300mm? Ideally 150 or 200. Not picky on thickness as I haven't ordered the main panel yet. I want to chicane a walk-in entrance to the "corner" of a 1400x900 tray and 300+ 600 feels a bit tight...

The Carel controller on our ASHP is cascadeable

Does the App have it's own transmitter/ current sensor or does it use the smart meter?

Controversial I know @newhome but does anyone in the village own a car or ever need it maintained?

because the flow temperature seemed to change randomly and now the temperature modulation thing is discussed...

failed stat in the immersion heater and (IIRC) G3 compliance.

Our supplier was happy to go a bit over the maximum with the caveat of a reduced warranty on the hinges. Did your supplier say what the maximum allowed *was*?

Is anyone else having flashbacks to the Zoot story?

You've not experienced just how smart waterproof chipboard can be.

We're certainly well pleased with our hemihydrate screed.

how long is the garage?

Yes, one system at each end of the house even tho we'll likely only ever have one stove needing direct air. Whilst you can build it stand-alone, ours is inside a standard block chimney. There's some piccys on my build thread.

what kind of flue/chimney are you having? Would SwiftAir be a possibility? Takes wind direction out of the equation... It's a smart system and I found it to be a no-brainer. https://www.schiedel.com/uk/products/ceramic-system-chimneys/swift-air/

LoftBox used to be the go-to for this kinda thing as it does all the combining and redistribution.

is indoors ever really a good place for an oil boiler tho?

What distance is the pipe covering?

it must presume there's no buffer volume then?

can we get a shot of the plumbing at the bottom of the tank plz?