Jump to content

dpmiller

Members
 View Profile  See their activity

  • Posts

    4487

  • Joined

  • Last visited

  • Days Won

    4

 Content Type 

Everything posted by dpmiller

  1. dpmiller
    Can't be sure as it was part of our windows contract. But full list in their Doorbuilder (two years ago), including two etched sidelights and a bit of frippery on the glass panel, was £1300 plus vat.
  2. dpmiller
    /say howmuch??
  3. dpmiller
    competition? or lack thereof?
  4. dpmiller
    Apeer is good, we have one. Plenty of resellers in NI...
  5. dpmiller
    on the insulation, they supply it on a roll, you cut it to match the circumference of the pipe. So roughly 2m duct per metre of insulation...
  6. dpmiller
    put the printer under the body dryer in the bathroom?
  7. dpmiller
    ...just found our invoice. £100/ hr, but at the end of the day (including fees for mapping and some additional printing and stuff) less than two grand total.
  8. dpmiller
    yep, kinda like @Russell griffiths IIRC. Can't put my finger on the invoice just at the moment.
  9. dpmiller
    Our guy discounted heavily off his standard rate as there was loads of waiting time and not so much doing.
  10. dpmiller
    earths all good, anode (if so fitted) in good nick?
  11. dpmiller
    water alone won't rust it- where's the air coming from, or is there something galvanic going on?
  12. dpmiller
    did you not have the pipes full and pressurised when the slab was poured?
  13. dpmiller
    how does that make it noisiertho? The same compressors are used in fridges and freezers...
  14. dpmiller
    why would a freezer be noisier than a fridge?
  15. dpmiller
    windscreen fitters use'em too.
  16. dpmiller
    why would the ASHP need to control the immersion? Are you concerned about legionella?
  17. dpmiller
    Your BCO might have his own thoughts depending on local conditions. Ours was happy with 300mm cover
  18. dpmiller
    ^wot Dave says. If both machines are "clean" - and your router will have some kind of firewall too, yes?- what risk do you expect?
  19. dpmiller
    if you're not on an open network and both machines are already clean what's your concern? /can you not just pull the HDD and slave it into the W10 box either directly or on USB?
  20. dpmiller
    why is the membrane on the INSIDE of the panels?
  21. dpmiller
    guessing you don't have the full manual, some don't seem to have all the menu stuff. This is for my High Flow but the menu should be the same. kinetic_sentinel_manual_1.pdf
  22. dpmiller
    I know I've said this before, but you can mix and match (and switch between normal and grid faceplates) with Hager Sollysta too.
  23. dpmiller
    why are the arrows pointing the wrong way on the cold flexy?
  24. dpmiller
    ordered a similar-looking item from PSW to appraise and as pretty as it is, it seems like more hassle than it's worth by the time you deal with mounting it in the limited depth of a service void
  25. dpmiller
    Irish? you trying to start a war??????
×
×
  • Create New...