Onoff

Take the ceilings down downstairs. Make a hole in the eaves, slip the steel in and support from underneath as you go.

3D print in ABS. You could likely get away without any support if you kept all the angles above 45deg. Solvent weld should work on it. A little Y piece I did for my gate conduits. https://flic.kr/p/2mmDsvX

As great as it is, I thought there were rules about how close to a boundary you could build a flammable structure? Is it the case that once lime rendered it sorts it?

At one point we had two water meters. We had a water meter already, inside our boundary fence. Other properties didn't as our plot was originally part of a bigger small holding. They wrote to everyone including us saying they would be fitting meters. We wrote and said we already have one. I came home and found they'd fitted another at the roadside. It got very confusing bill wise. Any way, the original meter: Then after me having got them to remove it. Looks very similar to what you have now:

Is it thatched places have to be wired in pyro...or was that churches...?

Maybe I missed it but what's the plan for lights and power?

You sometimes see discoloration & rusting on stainless steel around welds.

Lad up the pub is always lamenting you never see it in the UK anymore: Need to come up with a witty comment to write on the back. He's a raconteur & prolific teller of tall stories. If I leave it a couple of weeks it'll be "Steve, Happy 4th July!" Or maybe "Remember the good old days?"

3 coats of Satin Black Bedec Barn Paint on my new/second, scaffold board gates. Paint still looks like new.

Black Jack.

Lidl. "Mmmmm".....wasnt my first thought.....

Chat up line?

He had been for an Indian and been served by a robot waiter.

My mate's on a train in Malaysia:

Any links to a good, cheap MVHR unit that would do the one bathroom? Room volume nom 9m3.

Not easy. To get a duct to the other side of the kitchen would mean clearing an upstairs bedroom, carpets up etc. Possibly an option for later though. Would have to drill though the wall where the copper pipes go through. Not sure on joist levels etc. Would my idea of the fresh air duct just outside the bathroom work?

Still got to do this so thinking on options and tbh ease of install and maybe future planning: Option 1: Simple extractor fan. place directly above the shower end of the bath here (Zone 2): Duct through the wall: To vent here: Or ducted to a tile vent: With the above, potentially no drilling. No MVHR though. Option 2: Vent Axia Lo Carbon MVHR unit, 12V: Mounted here, again in Zone 2: Ducted through the wall to here: Thinking the heat recovery aspect and bringing fresh air in would be good. Or a combination of the above, or something else...no drilling is appealing. How about. A "proper" MVHR up in the loft space. Fresh air intake and warm, wet extract tile vents on the roof, one each end. Warm, wet intake in the bathroom, same place, above the shower. Fresh air ducted into the lobby ceiling just outside the bathroom? Would I need to insulate any ducts?

Tbh he very likely passed it on as his own observation. Whatever if it gets it sorted. The powers that be would be more likely to listen to him than me. Saying that, an email from Joe Public on this sort of this thing nowadays tends to sort it as it leaves an undeniable paper trail.

I knew one of the consultants working at the then new London Bridge Station. As a passenger I noted some stupid, projecting screws on the escalators. Took a photo and told him. Next thing they all got changed.

Cruising then. Talk about busman's holiday!

No comeback? Presumably in custody charged with going equipped...with a DeWalt cordless and holesaw!

Are you looking for fastlove?

Never had an issue until now in about 15 years. Now there's 5 people using the bathroom. Got any links to this and where the vents should go?

Went over today and had a look. Definite mould spots Need to sort asap really. Bathroom is nom 9m3. Height from floor to ceiling is 2170mm. Inside bath to ceiling is 2100mm so Zone 2 all the way to the ceiling above the bath and 600mm past the bath. Interesting outside, an old air brick blocked up with a very weak mix. There's no matching vent inside though, cavity vent?

Spray the whole lot with concrete dye. Or knock one of these over: