Nickfromwales

Keeping in mind that a crap induction hob will still suck 40a, and a tidy one over 50a. That wouldn't be a small generator.

Yup. Shouldn't matter if it's a smart charger as it'll charge according to the state of the battery. Mine stops and gives a 'fully charged' indication and then gives just a tiny tickle to maintain it.

Which make? Any links ?

Do you use a straw?

You need to get out more often

10

Nothing better than being covered in magnetic eps dust.

No building control recognition and subsequent registration of your new gas installation = no insurance. Put a reasonable price on that ? 30 years ago things were different, but in 2017 what advice should we suggest here, given our wide viewing audience, some of whom only read what's written here. ? 30 years ago all you needed on a construction site were Teflon coated Y-fronts and some sunblock. A bit different today where you need a high vis to fill your trolley in b&q. Lets advise according to 2016/17, and do it with the same passion, concern and conviction 'we' display when discussing say air tightness and insulation levels. . And yes, I'm quite passionate about this subject

You can box clever, buy these and then a naked impact etc and mix n match the tools, batteries and charger as necessary. One point not raised yet is the unreliability of gas guns in the extreme cold. I often have to take the gas out and warm it between my hands before my hitachi will fire, and then it's not 100% consistent. Dry, regular days are not a problem though, so just a point to consider. If I was in your shoes it would be a tough call but I think I'd go with the Dewalt tbh, due to gaining batteries and a charger. All depends on whether you have Dewalt tools already or not I suppose.

Happy days. ?

You wake up in the morning and everyone is alive for another day, by luck rather than good judgment. .

Agreed. Think of all the takeaway food you could order if you didn't spend £100's fitting the 'doomsday' cooker. The takeaways would cover you during the powercut btw, and you ring them off your mobile. Simples!

Much as I've done loads of gas work, it's all been either under 'supervision' or commissioned and signed of by a GSR fitter. I don't think I could live with the consequences of a fatality caused by my own hand, even worse if it's was one of my own family who died whilst I wasn't at home. There is ABSOLUTELY NO EXCUSE not to get a GSR fitter to test and commission pipework you've pulled point to point. None whatsoever other than just being too tight or failing to see the infinite value in doing so. 1) Sleep at night knowing your installation is safe. 2) Same for your family. 3) You can't get a completion certificate on a gas install unless done as above. Fitting it yourself afterwards is just a mind-numbingly bad idea. 4) Good luck claiming on your insurance if said, non-registered work, causes a fire or total loss of your home. You won't get a penny. How anyone one can see value in not paying for this to be done properly is beyond my comprehension.

I hate that loophole. If you are ok to do your own gas work, then, should you not, be the only person whom resides there?

+1 to going by the doorway. PIR light ( bright one ) and they're less likely to be hammering, chiselling or grinding in full view. I can never understand anyone putting it out of sight / rear etc as scrotes can then work away at it out of sight. I pointed this out to one customer who moved it the next day.

@JanetE Go for the plastic coated soft copper and endeavour to be 'joint free'. Remember that you'll have to remove the coating to get a bending machine to fit the radius . Re-cover with yellow electrical ( pvc ) tape, no probs there. You can mount the LPG bottled remotely, e.g. behind / alongside an outbuilding, or right at the rearmost quarter where they won't be seen. They don't have to be against the house, and fwiw, I'd prefer them well away from the skin of my TF house in case of a leak. Go for the best of all options :- 1) Fit small bottles. Lower line of sight for the 'cover' as you haven't got one single 5' bottle to try and hide. 2) Fit an auto-changeover arrangement with 2x small bottles. No running around in the rain with a spanner whilst the sprouts go cold. 3) You won't need to buy a gauge as you'll see the auto changeover indicator has 'flipped' and then just change the empty at your convenience as you'll know it's spent. 4) Soldering LPG is permissible ( quick google finds the regs ) in a fixed installation. Do not have a compression fitting where it's not accessible or in a void of any kind. You may end up using the gas hob more than you expect as, personally, I dislike cooking on electric, so think twice about a single bottle arrangement .

;)

Buildhub owns the rights for the book, so I'm hoping it'll sell more copies than Jordan's "legs wide shut".

1 minute at 8 chuffing bar would show just about anything. Crack on, I say. .

Multimeter is the first bit of kit you need. At the moment your just fumbling around in the dark . Get a reading off the battery and come back to us. Can you connect all the 12v stuff up directly to the battery and see if the charger actually did charge it? If not, can you check the fuse on the output side of the charger?

+1. Fit the pipes, let swmbo have the rug of her dreams ( "operation peace 'n' quiet' ) and fit a substantial floor board without worry. One previous job I did had posi joists with UFH pipes in Alu spreader plates. 22mm weyroc over the joists, then 6mm ply, then tile adhesive and then porcelain tiles. The only complaint was it was too warm in there. Heat will find its way through, trust me, and the rug is a very small area .

The alternative is to just say my name 3 times

Ness, I hope you're in good health.............. You know the drill, and great to have you back on board. If you wish to direct a question at a particular member, just type @ and then you'll be able to type the first letter of the members username and it'll pop up on a drop list. When you select it they'll get notified that you "mentioned" them in a topic. @Ness just like that. We've a much better board here with some great functionality, so posts and questions rarely go astray ( like they sometimes did on EB ). Now go back to intently staring at the foundations,

Tbh, the BCO has been good as gold. I'll not push my luck any further as we've been allowed historical regs for the basement flat which has saved a fortune. 2017 regs only kicking in on the upper floor as we're now doing an attic conversion ( so new works ) .

Change the akward to reach screws to hex or torx drive so there's less chance of them cam'ing out and getting stuck. Hex drive would be my choice here. The vado is a very nice looking tap, is the hard sale down to cost?