SteamyTea

Wouldn't that be the better way to do it. Why encroach on internal space when it can be outside.

2 kWh should be enough. I had 2 showers and ran my house on that amount yesterday.

That is all catered for in the white paper. They have to arrange carparking that has charge points. This is not actually new news.

If I remember, shall measure mine in the morning.

So does every self builder on here. 90% finished, 90% to go.

How do you make your own. Does it involve stripping Studland Bay of seagrass. Or is it the seahorse tears that do the business.

I sailed one. Called a gnats cock on the shop floor. Now, interference fits, tights as a nun's (expletive deleted).

Where they at the same temperature?

I think they are probably more to do with making sure all the phase change material becomes liquid while heating. Convection currents will tend to even the temperature out, but an off set to cater for distance from element could be easily established with experimentation. I do not know the product well enough, but as it knows it is full (element turns off), it would not be too hard to program something to make it take a charge after use. I think it has to treated like a car with a very small fuel tank on a long, unknown, journey. You take every opportunity along the way to fill it up as you go along.

Have often thought this is a good idea to get an extra kWh or 2 in a cylinder. I am currently running my cylinder with just the top element (on a timer to get the E7 rate). Water temperature is 20°C higher than it used to be, but a lot less volume and much less mixing. So saving between 1 and 2 kWh/day. Usually have enough hot water for the after work shower.

That is because they don't know it accurately enough. The trouble is that the phase change temperature is a constant. The only way to get it fairly accurate would be to measure the electrical input, measure the thermal output, factor in standing losses, then do the sums. Only needs a cheap thermal energy logger, a simple processor unit and some time. If the flow rate is constant i.e. just showers, no need for a flow meter.

The more the merrier. So am I, makes it easy. I just got a RPi based logger on a CurrentCost energy monitor.

The energy transfer is greater when there is a larger temperature difference between OAT and IAT. So when you want the maximum transferred, you get it.

Two different ways of measurement there. Comparing delivered energy with primary energy is a bit naughty. To David and Helan Why would you not try and get an airtight building while it is a shell? Beat the architect with a stick until he works out a decent method of detailing that can be constructed.

Is that because it is aluminium extrusion? Taking a leaf out if SpaceX book, stainless steel would be stronger and lighter than aluminium, or CRF for that matter, and I think it conducts less heat.

Ask a builder, then reduce by 20%, but buy them a tape measure and sharp knife.

Good if you want to use a lower flow temperature. 3500 litres of oil is not excessive, about 35,000 kWh. At nearly 400m², you are using about 90 kWh/m².year. Pretty average. I use 42 kWh/m².year in a terraced place, in Cornwall (just the heating that is). You could put in a simple electrical resistance heater in a buffet tank, or a Willis heater plumbed in directly to the pipework. Then dump excess PV into it. Buffer would my option as you can retain the current oil burner. So work in airtightness and insulation, worry about the technology once you get your oil usage down to 18 MWh.

VR headsets.

Yes. I like joules as a unit. It is more relatable to mechanical things.

Happy to take that away as well. Magpie me.

Buy a 4 port one and you can plumb in any combination.

It should be possible to, in effect, make a freestanding sliding door. This would be mechanically fixed to, but not structurally part of, the wall. Then clad/cover to make the pockets. @craig may know how to do something like this. There are some cars original Merc S class, that had electric windows, that were double glazed, that slid into pockets in the doors. They could survive and work reliably, at 155 MPH, and bouncing down a rutted road.

GRP, the better third option.

The worse job I every had to do was cleaning out the DE filter at the Sheffield YMCA. I have no idea what those young men got up to in it. It was worse than removing the Queen's Club, in Bayswater, steamroom in the early 90's

You (ex) Bristol Boys and your night time activities, this is a respectable website.