Given any experiences you have had, what would you choose tomorrow

[Makeitstop]

Hi all.

 

OK, so the question above is aimed at frame material for windows / doors, and, whether any future choice would be wood, pvc or aluminium framed products, whether they be double, triple or whatever glazing. 

 

This is obviously for products of the kind of dimension that all materials could handle, so no 20ft high mega sliders or suchlike.

 

Thoughts, and why?

[Mike]

1st: Anodized aluminium-clad oak with triple glazed, budget permitting. Best all-round performance, durability & ease of maintenance & repair.

2nd: Oak, with double glazing to the south and triple to the north.

3rd: Other hardwood timber with double glazing to the south and triple to the north.

4th: PassivHaus-certified aluminium

 

Never PVC - too many potential problems. I've posted about that somewhere on here.

[SteamyTea]

How about GRP or stainless steel?

 

I think the problem with all material selection is not the materials, but the manufacturing and installation.  Usually material limitations can be designed out.

[nod]

Your back to the same thing again BUDGET If budget isn’t an issue All of the above PVC with good U values are fine I almost went for Alli 

But couldn’t justify the 70k price tag 

Half the purchase price of the plot 

For just windows 

[Makeitstop]

Thanks all.

 

Blimey Mike, 1st choice there would hurt the pockets. Why never pvc?

 

Steamy... never heard of grp in window frames, is it used? What would you choose?

 

Nod, yes I get that re: your own selection. Ally is so expensive, and I'm not sure what the real world advantage is when sizes can be Don in alternative materials. What did you use and are you happy with it?

[SteamyTea]

7 minutes ago, Makeitstop said:

Steamy... never heard of grp in window frames, is it used? What would you choose?

I had never heard of them, in a domestic setting, until someone over at the other place mentioned them.

 

I used to make the window frames out of glass reinforced phenolic resin for the 125 trains.  Totally different criteria though, was all about safety.

 

Try doing a search for them, bound to be a lot of people doing them.

[Russell griffiths]

Aluminium clad timber, triple glazed. 
im in awe of our windows every morning when the condensation is on the outside and the inner frame and glass are actually warm to the touch. 

[Jenki]

As said above it's got to be down to budget. I did get some prices for triple glazed timber /Ali however the quote was around 1/3 of our build cost (including the triple glazed UPVC we went for).

My view was UPVC hinges, beads etc are easily changeable if needed. 

I do wish I'd selected a different front door, I went for a slam lock composite door, this was a big mistake with the high winds we get. But you live and learn.

 

[Redbeard]

The only GRP frames I have 'met' in UK were imported from USA (or possibly Canada - long time ago). User was very happy with them.

[Kelvin]

We have Nordan aluminium clad timber 3G windows. They perform well (checked them with a thermal camera) and look great. The main selling point of the aluminium cladding is the longer warranty (typically) and you can ‘easily’ replace any cladding that gets damaged. While this is true how easy it is depends on which bit gets damaged. If around the glazing unit easy enough. If it’s around the frame then it isn’t. In hindsight I should have gone for 3G timber painted. Also our Nordan front door is a weak link as it’s not sealing properly when shut. I’ve yet to adjust it so hopefully it is just that.