Pocster

Wired up the saniflo compact . surprised for a macerator how quiet it is . How easily it shifts a big 💩 though has yet to be tested !!

Keep fighting to push forward - respect ✊

Cheeky (expletive deleted)ing useless counting twat mother (expletive deleted)er slit (expletive deleted)ing shite basted chicken licking (expletive deleted)

I guess it depends if you can get to those joins in the event of an issue . 95% of mine I can . But ; I’ve yet to have a Hep2o fitting fail !

My view on this is simple . Had a manifold of manifolds and run a pipe to every outlet . My backs (expletive deleted)ed so I can think of nothing worse to getting under a sink etc. to isolate it . It costs more in pipework ( but less in fittings if you just let the pipe ‘ go where it wants ‘ . For me to isolate in 1 place is fantastic - and I use this facility easily . I’ve just added an outdoor sink and broke my own rule ; branched off the kitchen hot and cold - it just wasn’t worth the effort of 2 new feeds . So in hindsight; an ensuite for example could just be 1 hot / cold feed rather than be a feed for each outlet I suppose . I guess it depends as well if you are living on a building site ( like I am ) ; the convenience of isolating each thing is great .

F all wrong with it

What is wonk ?

Wtf is wrong with it ?

Oi bitch ! Only swmbo’s ensuite has wee coloured grout ( her preference , truly a golden shower ) . Me ; I’m a white or grey guy . For the record I don’t cut holes in boards - I (expletive deleted)ing butcher them

Ain't (expletive deleted)ing go there. Try not to spend my time driving to shit shops. Ordered one from shite bay - saves me a trip to orange spunk bob shop.

I (expletive deleted)ing hate that store. I hate the logo. I hate the sick orange colour. I hate the shit products ( especially the displays of kitchens/bathrooms failing apart ). I hate the people that work there. I hate the people that shop there.

Quickly looking on flee bay and amazon can't find a silver/chrome one....... Just found one. https://www.drainagepipe.co.uk/chrome-plated-abs-waste-bend-90-degree-x-32mm-p-CW10/ 15 quid ffs! - that's how you plumbers up your 'parts' price! "Chrome luv, that's expensive . You know 'cause of brexit and so forth. That fittings 50 quid luv - but it will look great, better than cheap white plastic ' Oh ok B&Q https://www.diy.com/departments/floplast-chrome-effect-compression-90-waste-pipe-bend-dia-32mm/136755_BQ.prd?storeId=1280&ds_rl=1272379&gclid=CjwKCAjwwL6aBhBlEiwADycBINHr2CKCLBunLag8FsePvL7apO8fwTvsAk-7eMH9fSNKmvj6sIQXUxoCKEIQAvD_BwE&gclsrc=aw.ds But their stuff is shite.

I know a word similar to wonky.

There is no cistern - SPECIAL TOILET! Tomorrow I just want to check it all works. Once boarded out and tiled toilet bolts to floor so no moving backwards.

Didn't think/know of a chrome one. TBH you can't see it unless you get down there. I'm so (expletive deleted)ed off with it - that as long as the tails disappear (for the most part) it will be good enough.

All ready to test tomorrow This glue better than the osm standard stuff . It’s runnier so spreads better . The applicator is a ‘sponge’ ball - so it’s easier to send round the edge of a pipe even if you can’t see it .

Ok - I’m not a plumber , though I do have many confessions. If I paid a plumber to do this job he would of been worth his weight in gold . So respect to some plumbers ! Apart from my glass sliding ensuite door I don’t think I’ve said (expletive deleted) and (expletive deleted) so many times in one day . Finally on the wall ( to remove before tiling ) ; slight weep on the wanky bottle trap . What was wrong with this simple job ? Can’t wall mount properly as one hole at the rear is effectively inaccessible. So put brackets in wall and will ct1 basin too wall . Supplied waste is too long unless you like seeing thread . So had to buy a shorter one . Bottle trap is a right (expletive deleted) . Only pipe that fits as outlet from bottle trap to wall fitting is their supplied one. Unlikely as it sounds it is made of kryptonite and a mofo to cut Supplied tap tails too long . Hence why you see that big hole under the basin as to originally where I thought the water supplies would be . Determine not to buy new shorter tails aswell . Taken me all day to get on the wall , I thought the macerator would be a pig not the bloody sink !

No over flow . Although all supplied as one it’s all a bit shit in my opinion . Better off me ordering a short version ( didn’t know they existed ) for example https://www.victorianplumbing.co.uk/bauhaus-unslotted-small-click-clack-basin-waste-bsw0260c?campaign=googlebase&gclid=CjwKCAjw-rOaBhA9EiwAUkLV4ohAEMiKYdSnh42ctcs9NPJKr8_m430HzX6l_HGJZniVys_-gjWcaxoCsLwQAvD_BwE&gclsrc=aw.ds Not that I would buy it from VP as they sold me the shitty “ can’t fix to wall “ sink that supposedly fits to a wall 😞

Supplied with this pig sink is the waste and bottle trap . I assumed the trap would tighten right up to the underside of the basin . The plug waste is too long or the bottle trap top thread is too short to allow this . Is this correct ? I.e should that amount of sink plug thread be showing ??

I’ve had a few fitting like this where the supplier even suggests doing this . I tried it once and with enough force could pull the fitting apart . So when the destructions state olive compression fitting onto Hep2o pipe - I just purchase a threaded hep20 fitting otherwise I won’t sleep at night .

@Onoff when you’ve got time to suck on something

For dinner tonight

Bast !