Moggaman Posted December 31, 2021 Share Posted December 31, 2021 Hi. I will have 2 walk in showers in my new build. Both will have concrete walls on 3 sides of the shower.. they will be tiled but am wondering if I should plaster the walls first before the tiler or does the tiler generally tile onto block. thanks Link to comment Share on other sites More sharing options...
nod Posted December 31, 2021 Share Posted December 31, 2021 Generally plastered or boarded But it’s really not an issue tiling into flat block or concrete Just more adhesive 1 Link to comment Share on other sites More sharing options...
Onoff Posted December 31, 2021 Share Posted December 31, 2021 If I were you I'd be wondering whether or not to tile at all and use wall panels instead! 1 1 Link to comment Share on other sites More sharing options...
joe90 Posted December 31, 2021 Share Posted December 31, 2021 I am a convert from tiles to wall panels, no grout to go mouldy and easier to clean. 1 2 Link to comment Share on other sites More sharing options...
ProDave Posted January 1, 2022 Share Posted January 1, 2022 Another vote for wall panels, Look for "multipanel" and as a tip, I found Jewson sell them far cheaper than the "bathroom shops" 1 Link to comment Share on other sites More sharing options...
Big Jimbo Posted January 1, 2022 Share Posted January 1, 2022 And another vote for wall panels. I have used expensive 9mm ply panels with a facing, down to cheap 200mm wide plastic, 6mm thick panels. Both gave excellent results. Panels available have defo moved on from that mobile home in the 80's look. Dont get me wrong, i love a good tiling job, but i just hate grout. 1 Link to comment Share on other sites More sharing options...
SteamyTea Posted January 1, 2022 Share Posted January 1, 2022 Can you get panels in plain white. I hate pattern in a bathroom. Link to comment Share on other sites More sharing options...
joe90 Posted January 1, 2022 Share Posted January 1, 2022 5 minutes ago, SteamyTea said: Can you get panels in plain white. I hate pattern in a bathroom. Yes! 1 Link to comment Share on other sites More sharing options...
Thorfun Posted January 1, 2022 Share Posted January 1, 2022 thanks to this thread we are now aware of wall panels! not something we'd considered before but they are now definitely on our radar so thanks to those who have recommended them. ? 1 Link to comment Share on other sites More sharing options...
saveasteading Posted January 1, 2022 Share Posted January 1, 2022 4 hours ago, Big Jimbo said: i love a good tiling job, In theory I like panels, but the cutting of openings is scary, which it isn't with tiles. Measure 5 times, get a second opinion, cut once. If wrong then it is an expensive mistake. With tiles there may be many tiles to cut for the pipe holes but the measuring is easy and the risk is low. Or is it not so bad for panels? I have only done it once for a kitchen back-board with multiple sockets to cut, and 'got away with it'. We have lots to do so I'd prefer panels if convinced. What is best for backing? Link to comment Share on other sites More sharing options...
ProDave Posted January 1, 2022 Share Posted January 1, 2022 18 minutes ago, saveasteading said: n theory I like panels, but the cutting of openings is scary, which it isn't with tiles. Measure 5 times, get a second opinion, cut once. If wrong then it is an expensive mistake. What openings are you talking about? All ours had to be cut to fit the sloping ceiling line of a room in roof bathroom, then the cut outs for shower controls and shower heads etc. I found it best to template it first for each panel with large sheets of cardboard. Get it right with the cardboard then mark out the actual panels. 1 Link to comment Share on other sites More sharing options...
TonyT Posted January 1, 2022 Share Posted January 1, 2022 Generally easier to find the centre of the wall mark a vertical and horizontal line with a spirit level, then take measurements to outer edges and pipe centres. transpose these dimensions onto the wet wall, by doing the same starting from the centre mark 1 Link to comment Share on other sites More sharing options...
Adsibob Posted January 1, 2022 Share Posted January 1, 2022 19 hours ago, nod said: Generally plastered or boarded I thought it was bad practice to tile onto plaster? This issue came up on my build this week when the plasterers plastered the bathrooms and in one bathroom they plastered two walls which are due to be tiled floor to ceiling. I thought it was a mistake, as i thought tiles need something more solid than plaster, and if the grout were ever to fail, it risks the plaster getting wet and failing. Link to comment Share on other sites More sharing options...
nod Posted January 1, 2022 Share Posted January 1, 2022 1 hour ago, Adsibob said: I thought it was bad practice to tile onto plaster? This issue came up on my build this week when the plasterers plastered the bathrooms and in one bathroom they plastered two walls which are due to be tiled floor to ceiling. I thought it was a mistake, as i thought tiles need something more solid than plaster, and if the grout were ever to fail, it risks the plaster getting wet and failing. I would always prefer to tile directly onto plasterboard Without it being skimmed But many builders prefer the walls to be skinned Red Row Willmott Dixon etc There only an issue when the tiles are very heavy Think from memory about 5kg m2 difference between skimmed and plasterboard But when the tiles are so heavy We use sand and cement and cement board Or go directly onto the block work Link to comment Share on other sites More sharing options...
saveasteading Posted January 1, 2022 Share Posted January 1, 2022 25 minutes ago, nod said: prefer to tile directly onto plasterboard For my own (and family) house I will always now use Aquapanel or Hardybacker. As an amateur it was very good to work with (both fixing it and tiling) , plus I know there is a waterproof layer if the grout or silicon fails. I found Hardybacker easier to work with, than Aquapanel. Link to comment Share on other sites More sharing options...
nod Posted January 1, 2022 Share Posted January 1, 2022 We tend to use The Gypsum backer board More cost effective than Hardy Performs better and is lighter and can be cut with a knife Link to comment Share on other sites More sharing options...
SteamyTea Posted January 1, 2022 Share Posted January 1, 2022 4 hours ago, joe90 said: Yes! Good. May be able to modify my bathroom to get a slightly longer bath in it. Link to comment Share on other sites More sharing options...
joe90 Posted January 1, 2022 Share Posted January 1, 2022 18 minutes ago, SteamyTea said: to get a slightly longer bath in it. But you will use more hot water and energy ?♂️, only joking, do you have a 1500mm bath? (I hate them unless only showering over one). Link to comment Share on other sites More sharing options...
Adsibob Posted January 1, 2022 Share Posted January 1, 2022 1 hour ago, nod said: But many builders prefer the walls to be skinned Red Row Willmott Dixon etc Why? What’s the advantage of this approach? Link to comment Share on other sites More sharing options...
SteamyTea Posted January 1, 2022 Share Posted January 1, 2022 32 minutes ago, joe90 said: you have a 1500mm bath? (I hate them unless only showering over one). Not measured it properly, but it feels cramped, and as you know, I am only 6 foot 2 inches tall. May combine it with some rainwater harvesting. I am sure seagulls shit only smells slightly of herring. 1 Link to comment Share on other sites More sharing options...
Onoff Posted January 1, 2022 Share Posted January 1, 2022 1 hour ago, joe90 said: But you will use more hot water and energy ?♂️, only joking, do you have a 1500mm bath? (I hate them unless only showering over one). 1800mm bath here. 800mm wide. I'm sure it'll be very nice if ever I have enough hot water to fill it. 1 Link to comment Share on other sites More sharing options...
SteamyTea Posted January 1, 2022 Share Posted January 1, 2022 6 minutes ago, Onoff said: I'm sure it'll be very nice if ever I have enough hot water to fill it. Costs me less to heat the water than pay for the sewage when I pull the plug. Have I ever mentioned how expensive water is in Cornwall, the most expensive in the country. Link to comment Share on other sites More sharing options...
joe90 Posted January 1, 2022 Share Posted January 1, 2022 7 minutes ago, SteamyTea said: Have I ever mentioned how expensive water is in Cornwall, Many times, unfair tho with so much rain in our part of the world, perhaps you could instal rainwater harvesting Link to comment Share on other sites More sharing options...
saveasteading Posted January 2, 2022 Share Posted January 2, 2022 2 hours ago, SteamyTea said: Costs me less to heat the water than pay for the sewage when I pull the plug. Bathwater is good for the garden. Link to comment Share on other sites More sharing options...
Iceverge Posted January 2, 2022 Share Posted January 2, 2022 @SteamyTea @joe90 I assume our Kerradeco panels wouldn't be to your taste then. ? 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now