Pocster

Bitch !!!!

Why? ; that no CGT I mean ???

But they do seem to do stop cocks MDPE to Hep2o ......

Please note we do not have a connection between 15mm Hep2O and 20mm or 25mm MDPE." I'm guessing just Wavin don't but speed fit or similar do??

Wavin state " I would like to joint my Cold Water Blue MDPE Pipe with 15mm Hep2O barrier pipe for an outside tap. Is it okay to use? Hep2O is for internal use, however if it is used externally it will need to be protected from frost and UV light. Please note we do not have a connection between 15mm Hep2O and 20mm or 25mm MDPE."

Still changing it to Hep2o for my own peace of mind.

BUM!

Right ! Decided ! Rip this out and re do with Hep2o . I think the mdpe is 25mm

Tempted to rip all the mdpe out and just have 1 mdpe to Hep2o converter .... They exist I assume !

This is the worse offender . All my 90 degree fittings are plasson . You get that satisfying click when the pipe is fully in . Not with this crap tap and it wasn’t cheap . You can put the pipe in , no click , force it as hard as you can and it’s still loose and can almost fall out . I won’t swear in type I’ll just vent it out here on my own !

I’m just trying to get my mains mdpe into my manifold . Then it’s all Hep2o from there . I’d go insane mdpe’ ing an entire house

They do exist ! https://www.diy.com/departments/erbauer-sds-max-to-sds-plus-chuck-adapter/1738247_BQ.prd

I’m not sure where they came from . The quality does seem to vary quite a lot . All WRAS approved but some feel cheap !

Erm ! So no sds max to sds converter ? ?

Having one of those days . Me and mdpe have a bad relationship- some fittings no probs others I start swearing as they leak . Harder I try colder and wetter my hands get lessen the chance of success . Then you can’t undo a fixing ; so you undo at the other end . Then when you put back other end leaks - more swearing . Hands numbing from cold water in dungeon . I put the gun down ( do I shoot me or hunt down the mdpe inventor ) . “Speedfit fixings” think I might have a court case there for misleading title . I know the pipe has to be straight to go in the fitting snug but (expletive deleted) me ! I lie it on a flat bit of timber - yes it bends maybe 1mm - still leaks . More swearing . Then the suicidal voice says “ F this ; go for a jog “ I hate mdpe - I hate it . It’s not ‘flexible pipe’ , a fitting that hasn’t ever leaked decides it wants to today . Push fit to brass - give me strength ! STOP LEAKING ! I’ll stop otherwise it will be the call to the Samaritans .

Not sure this exists But I’ve got this nice 18mm 800mm drill bit - but the sds fitting is to large for any of my drills ( apart from my Hilti but that’s just a breaker ) . Is there some converter that I can use so it fits a conventional hammer drill ??

I have no idea how I’m going to pay for mine either - that’s all part of the challenge. !

Very generous of you ???

123456 - there you go - now back to work ! ??

Christ sake man ! Get a move on ! Even I’ll be finished before you I.e either completed or dead ?

But then what ? I miss the bathroom biblical epic ?

Does your sparky fancy a trip to Brizzle ???

It is just cat cable at the moment. Trying to find a reliable cost reasonable electrician is virtually impossible. I’m hoping to do the mains wire aswell but advised and monitored by a qualified electrician who will sign it off .

Cheers @JSHarris ; you’ve been super helpful !

Ok - that sounds reasonable. But do I have to trunk right to the end spot ? . Say I have a humidity sensor I wish to place in a ceiling - do I have to trunk directly where I think I want it ? . If when I test the sensor I need to move it ; I re adjust that trunking ? . I guess I’m asking is there any Lea way for the cable going from trunking to device ?