Onoff

Go on Amazon and buy the caps at those quantities

M14 is like a non standard standard generally and a pita tba. Stay with M12. How many caps do you need & what colour? Edit: 8 is it?

Plastic nut caps. We just print them as we need them now: Ready made caps:

Drill in from each side. As long as you're near enough the second hole will pick up on the first. Stick a little bubble level atop your drill if you're that worried & line the drill up left to right with a square on the floor or similar. Put studding through. Affix with a flat round washer, then spring washer then full nut. Ideally stainless. Leave/cut the studs so 3 threads projecting beyond the nut. M12 is 1.75mm pitch so 5mm is fine. Cap with a plastic nut cover.

Welcome. (Looking forward to something powered by radon!)

Mine? Length...

Is it me or is the grout in those vertical rips done level? Maybe to try and hide them?

To hide some of my poor tiling, where tbh you could hang your coat, I fittted..... .....a dimmer switch.

Poor planning there. I did exactly the same at the ceiling. As I'd fitted new ceiling joists I should have just counter battened. Wouldn't have had to hunt down 2.7m plasterboard either!

Might have been the same grout colour but a different batch? Tbh though I'd say two different colours. Is that a line of skinny, circa 1" wide tiles, ska "rips" in the corner or a vertical pencil mark? I did my floor first. Then brought the wall tiles down to a consistent 1mm off the floor tiles. Where I effed up was by not using a tile levelling system.

The chimney flashing detail maybe?

Fromunder actually. Would you like me to reimburse you the toll fee? Even @MikeSharp01 moved to get away...

A bit like the Dartford crossing model? Keep the parking charges in place for a number of years to offset the PV outlay then make parking free?

Gout?

How about Desmopol? I love the idea you can periodically just paint more on.

That must be dead handy and save a fortune on muckaway lorries!

Google "Appendix 15 of BS7671".

About 30 degrees...

Super quick this X1C!

You don't often see / hear anyone refer to an MCBO...miniature circuit breaker with overload? Tautology methinks! Changing to "Consumer Units, RCDs, MCBs & RCBOs" would be better.

About 21 feet each then, that's wide!

Bet you've never said that before!

Whoops...Bambu have a sale on. X1C incoming.

A wrap of Denso tape move on.