Nestor

Not a professional tiler, I made all the transitions between different materials in the centre of the depth of the door.

This is an undermount sink, worktop above ? I fitted a couple of timber horizontals to support the long sides as was fitting a concrete worktop.

Update regarding our Vent Axia Kinetic Plus B R/H. Worth checking the condition of the fans. Installed 6 years ago, cleaned the filters and checked the summer bypass, louvres stuck in open position. Have screwed the louvres in the closed position for now and disconnected the actuator. Fan covered in thick mould. Not difficult but front, back and side panel need to be removed. Then fan. All bearings fine.

On days like this I switch off the MVHR until late evening.

I stick built mine, 12m X 6m. Clad in Douglas Fir. Had a close shave with the large Oak in September. Nearly finished.

Great visuals, @Super_Paulie. I would try and max the shower base if possible, have you considered right hand offset tray? I prefer WC on left of door and sink along the same wall, with a small space before the window. If those tiles are 600mm possibly fit a 1200mm base.

This must be a Billing error, I saw the same promotion £25.00 / 6 months.

Thanks, I used SketchUp (excellent) for my build just not renewed subscription. Looking for a simple 2D app now. Make an access panel if possible.

Not an "expert" but have done exactly this in an outbuilding with shower, WC and sink with an AAV added. Like your drawings, what application are you using?

Cannot fault the Makita range, stay with the same battery system if possible. Have 30 + Makita tools and batteries, recently purchased the 100mm pruner, again excellent.

Nonsense, Mr Tank it, Tank it. How many shower cubicles / wet rooms have you tiled onto skimmed plasterboard in the last 10 years?

Are you tiling past the shower door or flush with shower door frame? You could keep the tile backer board and tiles inside of the door frame which is then fixed back to plasterboard depending on the width of door. Would need a very good seal. You want a T shape trim to cover both the board and tile or a straight edge trim to cover just the backer board. Have a look at: https://www.protilertools.co.uk/categories/tile-trim https://pureadhesion.co.uk/trims/

Personally I would not tile onto a skimmed plasterboard wall, they will become loose. I would fit 6mm Hardie backer board on all 3 sides and space accordingly with packers for even dimensions.

This from the planners is fair. Wait for the appeal then proceed again. All the information is in your previous topics.

Back again. Revisit this thread, from December 2025, you had plenty of good advice and even drawings.

These have a PVC or EPDM inner tube usually. Is the hose failing or the fitting? Is the supply in copper or plastic? Look as though they have been inside the cistern.

We have them in all rooms and use them most of the time instead of the overhead pendant lighting. Not another socket!

You need a 90' wall plate elbow fitting. Have a look here https://www.screwfix.com/search?search=wall+plate+elbow

I did try cooling the slab with the ASHP but the family discipline closing windows and doors during the hot periods was iffy so gave up. On sunny days the UVC is 67c with the immersion / PV diverter by 10am. The lower ground floor bedrooms are north and east facing with smaller windows so not an issue. The first floor bedrooms with vaulted ceilings are the warmest and AC is just so effective and the running cost offset by PV (+FIT).

Ideally both. Airtight here. I fitted MVHR and plumbed for AC in 1st floor bedrooms and main kitchen / dining during the build.

@Tetrarch Look at anti vibration mounts, neoprene dampers. A Yoga mat might be enough to fit between the unit and the mounting board.

I would recommend a professional and agree 2 person half a day. One will climb and cut, the other clearing and chipping.

Morning Ben, This thread last week. Congratulations on your build. It was @Oz07 asking.

@Indy

Have a look at Brundell. https://www.fhbrundle.co.uk/handrailing-and-balustrade/?campaign=267256041&content=794638935313&keyword=fh brundle handrail&utm_term=fh brundle handrail&utm_campaign=&utm_source=adwords&utm_medium=ppc&hsa_acc=1133268878&hsa_cam=267256041&hsa_grp=174725159712&hsa_ad=794638935313&hsa_src=g&hsa_tgt=kwd-365342768374&hsa_kw=fh brundle handrail&hsa_mt=b&hsa_net=adwords&hsa_ver=3&gad_source=1&gad_campaignid=267256041&gbraid=0AAAAAD2WxzuHTwb5d9pG0CRbcq3RV46Pz&gclid=EAIaIQobChMI5pfA-oDKkwMV8pFQBh050yNhEAAYAyAAEgI_6vD_BwE