Not ideal. Sack brickie now?

[flanagaj]

Just had a good look at the foundation masonry done by the brickie last week and it’s rough.

 

he say it doesn’t matter as it’s not seen.

 

 

[Redbeard]

Hmm. What does that out-of-plumb bubble represent? How far is it leaning in how tall?

 

From LABC Warranty:

"How far out of plumb can a wall be in the UK?

Wall panels should be erected to the following tolerances: • +/-10mm from plumb per storey height. +/-10mm from plumb over the full height of the building. +/-3mm from line of sole plate, with maximum +/-5mm deviation from drawing". In pic 3 (with a slack line on top of the blocks) where was the line when the blocks were laid?

 

Is this the brickie you were planning to use above ground?

 

 

 

[BotusBuild]

IMO, do NOT use this person for anymore work, particularly above ground. 

 

I had someone do some work for me recently who I can heartily recommend, based RG6 4 postcode area (S Reading)

 

PM me for details

[flanagaj]

44 minutes ago, Redbeard said:

Hmm. What does that out-of-plumb bubble represent? How far is it leaning in how tall?

 

From LABC Warranty:

"How far out of plumb can a wall be in the UK?

Wall panels should be erected to the following tolerances: • +/-10mm from plumb per storey height. +/-10mm from plumb over the full height of the building. +/-3mm from line of sole plate, with maximum +/-5mm deviation from drawing". In pic 3 (with a slack line on top of the blocks) where was the line when the blocks were laid?

 

Is this the brickie you were planning to use above ground?

That vertical bubble is only over two courses.  

 

Yes, this was the brickie that we were planning on using, but he'll be given his tools tomorrow morning from the lock up.  It's very disheartening that a tradie think that work is acceptable.  I've just got my laser level out and the corners of the garage are 20mm out on the horizontal.  There is also a block that's got no vertical mortar, it's literally directly butted to the adjoining two blocks.

 

 

[BotusBuild]

7 minutes ago, flanagaj said:

I've just got my laser level out and the corners of the garage are 20mm out on the horizontal.  There is also a block that's got no vertical mortar, it's literally directly butted to the adjoining two blocks.

That is SH1T - a technical term 🙂  What I'd expect from a week 4 apprentice.

 

I'll PM you the details now!

Edited 7 hours ago by BotusBuild

[Redbeard]

I used to hate doing footings and blockwork in trenches, because I did not do it that often. However these were generally small - medium extensions where the footing job was too small to be of interest to a busy brickie. So I was really picky of my own work... So my out-of-plumbs' or 'out-of-squares' were tiny, as I was always pulling myself up - and checking again... and again... 

 

To lift a term (thanks @BotusBuild) you need someone who gives a sh1t - sounds like @BotusBuild knows the person. Good luck in the 2nd go.

Edited 7 hours ago by Redbeard

[Nickfromwales]

That block-work is shockingly poor. 
 

Zero GAF, and there’s no way whatsoever that person should be doing anything for face work.

 

If you don’t care about stuff that’s not on show, to that extent, as the horizontal line looks like a waveform, then there won’t be much more care for the remainder. 

 

Shite. 

[flanagaj]

I'd paid them for the days they did and now I still owe him £250 for some engineering bricks, but I'm in two minds whether to tell him that he can take the £250 out of the £550 I paid him.  Just undecided whether it's worth the aggravation.

 

Edited 3 hours ago by flanagaj

[ETC]

Why are you building sub-floor blockwork in cavity construction? Would be better solid - plus easier and quicker to build.

[flanagaj]

2 minutes ago, ETC said:

Why are you building sub-floor blockwork in cavity construction? Would be better solid - plus easier and quicker to build.

He said he was happy to do cavity blockwork.  I'll ask the next bricklayer whether he'd prefer trench blocks.  

[ETC]

No need for cavity blockwork below sub-floor level.