PeterW Posted June 16, 2018 Share Posted June 16, 2018 On 16/06/2018 at 18:04, Onoff said: Febond Blue Grit. Expand Don’t.. just don’t .... the grit will end up in the top coat on the trowel and it will swirl like a biatch... PVA 5:1, big brush and wet it then skim on wet ... 1 Link to comment Share on other sites More sharing options...
Onoff Posted June 16, 2018 Author Share Posted June 16, 2018 Hypothetically, if I were to put the Febond Blue Grit on would it go on before the tape or after? Link to comment Share on other sites More sharing options...
Nickfromwales Posted June 17, 2018 Share Posted June 17, 2018 On 16/06/2018 at 20:20, Onoff said: Hypothetically, if I were to put the Febond Blue Grit on would it go on before the tape or after? Expand Hypothetically....... DO NOT USE BLUE GRIT ! 1 Link to comment Share on other sites More sharing options...
bassanclan Posted June 17, 2018 Share Posted June 17, 2018 Your brother in law will tape the joints first and then blue grit Link to comment Share on other sites More sharing options...
Onoff Posted June 17, 2018 Author Share Posted June 17, 2018 Not impressed at my first attempt at getting the Febond Blue Grit on the wall. Used a roller as they suggest on the tub. The effect was very hit and miss in terms of grit coverage and it didn't seem to want to stick to the mrpb very well. Also a lot of the grit seemed to fall off the roller to the floor. Scraped it off! Link to comment Share on other sites More sharing options...
jack Posted June 17, 2018 Share Posted June 17, 2018 On 17/06/2018 at 00:01, Nickfromwales said: Hypothetically....... DO NOT USE BLUE GRIT ! Expand On 17/06/2018 at 14:38, Onoff said: Not impressed at my first attempt at getting the Febond Blue Grit on the wall. Expand This thread is so fun. 3 Link to comment Share on other sites More sharing options...
PeterW Posted June 17, 2018 Share Posted June 17, 2018 On 16/06/2018 at 20:09, PeterW said: Don’t.. just don’t .... Expand On 17/06/2018 at 00:01, Nickfromwales said: DO NOT USE BLUE GRIT ! Expand It was suggested subtly that you don’t use it ... On 17/06/2018 at 14:38, Onoff said: Not impressed at my first attempt at getting the Febond Blue Grit on the wall. Expand So now you’ve probably realised why it was suggested not to use it ... Tape the corners, PVA 5:1 on the ceiling, mix half a bag of multi and get it on while it’s still damp. Walk away and have a brew while it’s going off, then make a second set (1/4 bag) and then overlay this, leave it 20 mins then go back and flat it back. Leave it 20 mins then get a clean wet brush and start to work the final finish - don’t worry about it getting too wet as it will soak up but don’t over work it. Clean tools and open beer. 1 1 Link to comment Share on other sites More sharing options...
Declan52 Posted June 17, 2018 Share Posted June 17, 2018 On 17/06/2018 at 15:13, PeterW said: It was suggested subtly that you don’t use it ... So now you’ve probably realised why it was suggested not to use it ... Tape the corners, PVA 5:1 on the ceiling, mix half a bag of multi and get it on while it’s still damp. Walk away and have a brew while it’s going off, then make a second set (1/4 bag) and then overlay this, leave it 20 mins then go back and flat it back. Leave it 20 mins then get a clean wet brush and start to work the final finish - don’t worry about it getting too wet as it will soak up but don’t over work it. Clean tools and open beer. Expand Go to bed happy. Wake up next morning and go and have a look. Pick your heart up of the floor when you realise it should have been done by your bro in law. Go and get tools and start scraping. 1 4 Link to comment Share on other sites More sharing options...
bassanclan Posted June 17, 2018 Share Posted June 17, 2018 You should be able to get the blue grit to stick fairly evenly, use a low pile, but not smooth roller. You need a roller tray, not just straight from the tub. It might be that you have to go over a few times to get it spread evenly, but I just did 25sqm inc celings in an afternoon. Link to comment Share on other sites More sharing options...
Onoff Posted June 17, 2018 Author Share Posted June 17, 2018 It appears Nick followed me: "Ffs! Mate, Sorry about this but by the sounds of things you haven’t got a clue. Just pay a spread to come in and sort it, small job like that won’t cost a fortune! And from the look of your job you are fussy and particular so why balls it all up now?" 3 Link to comment Share on other sites More sharing options...
Onoff Posted June 17, 2018 Author Share Posted June 17, 2018 Better to have tried and failed... 2 Link to comment Share on other sites More sharing options...
newhome Posted June 17, 2018 Share Posted June 17, 2018 On 17/06/2018 at 16:16, Onoff said: Better to have tried and failed... Expand "Ever tried. Ever failed. No matter. Try Again. Fail again. Fail better" 1 Link to comment Share on other sites More sharing options...
Declan52 Posted June 17, 2018 Share Posted June 17, 2018 I tried it once on a small wall up stairs in my last house. Scratch coat was decent but the skim wasnt. Let's just say it wasn't long before it got boarded over and hid. It's a real skill that takes years to perfect. Plasterers just make it look easy when it's really really not. 2 Link to comment Share on other sites More sharing options...
Pocster Posted June 17, 2018 Share Posted June 17, 2018 On 17/06/2018 at 16:16, Onoff said: Better to have tried and failed... Expand Don’t need to juggle chainsaws to find out what will happen 2 Link to comment Share on other sites More sharing options...
Nickfromwales Posted June 17, 2018 Share Posted June 17, 2018 On 17/06/2018 at 16:16, Onoff said: Better to have tried and failed... Expand or......better to have tiled and made the plasterer cups of tea..... FFS indeed. Please dont f.uck this up at the last minute !!!!!!!!!!! 2 Link to comment Share on other sites More sharing options...
Onoff Posted June 17, 2018 Author Share Posted June 17, 2018 (edited) On 17/06/2018 at 16:40, Declan52 said: I tried it once on a small wall up stairs in my last house. Scratch coat was decent but the skim wasnt. Let's just say it wasn't long before it got boarded over and hid. It's a real skill that takes years to perfect. Plasterers just make it look easy when it's really really not. Expand I've done a little bit in the past. A couple of 3' wide walls at the top and bottom of a landing in my first place and an 8' wide, full height wall with door and window in but that was 25 years ago. Only the odd bit of patching since. Going to get a 4' Derby. Edited June 17, 2018 by Onoff Link to comment Share on other sites More sharing options...
Nickfromwales Posted June 17, 2018 Share Posted June 17, 2018 On 17/06/2018 at 13:15, bassanclan said: Your brother in law will tape the joints first and then blue grit Expand Why would he blue grit it?!? Its new plasterboard not 30 year old render ! I give up Blue grit should not even be in the building 1 Link to comment Share on other sites More sharing options...
Pocster Posted June 17, 2018 Share Posted June 17, 2018 On 17/06/2018 at 16:56, Nickfromwales said: Why would he blue grit it?!? Its new plasterboard not 30 year old render ! I give up Blue grit should not even be in the building Expand This thread really cheers me up . 1 Link to comment Share on other sites More sharing options...
Onoff Posted June 17, 2018 Author Share Posted June 17, 2018 On 17/06/2018 at 16:56, Nickfromwales said: Why would he blue grit it?!? Its new plasterboard not 30 year old render ! I give up Blue grit should not even be in the building Expand Yet both British Gypsum say to use ThistleBond on MR and on the back of the Blue Grit tub it says specifically for MR. Worst case I cock it up and the BiL goes over it. Can't be hard. Lay it on, flat it off, fill in any low bits. Link to comment Share on other sites More sharing options...
Nickfromwales Posted June 17, 2018 Share Posted June 17, 2018 On 17/06/2018 at 16:55, Onoff said: Going to get a 4' Derby. Expand After youve spunked all your cash on the various potions, and devices with which to apply them, your have paid the spread. A 4' blade needs some serious skill, and I just about have the wrists for my 18" Ox for flattening off over old plaster etc. No xmas card for you this December ! On 17/06/2018 at 16:59, Onoff said: Can't be hard. Lay it on, flat it off, fill in any low bits. Expand Dead man walking The last customer who said exactly that asked to borrow my step ladder to skim his bathroom ceiling. When I came in the following morning, the ceiling was destroyed, his clothes were rolled up in the corner covered in plaster and about 8 litres of sweat, and my lightweight aluminium step ladder had to go in the skip as it weighed about 60kg with all the plaster that was on it. Took about 4 hours to clean the floor and walls too. My mate came in that evening and skimmed it for £80. Was like a sheet of glass. Disclaimer : After all this has been said, I really need you to cock it up or I'm going to put 2 stone on from all the humble pie and custard. 5 Link to comment Share on other sites More sharing options...
Declan52 Posted June 17, 2018 Share Posted June 17, 2018 Pva and a coat of bonding would be a better option. Then do the skim. Link to comment Share on other sites More sharing options...
Nickfromwales Posted June 17, 2018 Share Posted June 17, 2018 On 17/06/2018 at 17:09, Declan52 said: Pva and a coat of bonding would be a better option. Then do the skim. Expand A coat of bonding ? On new plasterboard ? Link to comment Share on other sites More sharing options...
PeterW Posted June 17, 2018 Share Posted June 17, 2018 I think he should go outside and cut some nice hazel and hand split it then replace all this nasty board with some nice lath .... Then lime plaster it, horsehair in the backing coat of course ...... 3 1 Link to comment Share on other sites More sharing options...
Declan52 Posted June 17, 2018 Share Posted June 17, 2018 (edited) On 17/06/2018 at 17:16, Nickfromwales said: A coat of bonding ? On new plasterboard ? Expand Yep it grips better and will be rougher finish so the skim sticks to it. If you put a handful in a skim mix it stops it going of as quick to give you more time to work your magic. Edited June 17, 2018 by Declan52 Link to comment Share on other sites More sharing options...
Nickfromwales Posted June 17, 2018 Share Posted June 17, 2018 On 17/06/2018 at 17:44, Declan52 said: Yep it grips better and will be rougher finish so the skim sticks to it. If you put a handful in a skim mix it stops it going of as quick to give you more time to work your magic. Expand Ah, you mean in with the PVA? Not laying an actual set of bonding? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now