saveasteading Posted April 25 Share Posted April 25 2 hours ago, gavztheouch said: my plate compactor does not go deep enough I reckon it will do the job fine. 100mm isn't thick. but give it plenty of whacking because type 3 has voids in it and may joggle into place after a few whacks. A very heavy roller might even be too heavy for this, and form itself a hollow. or skim a bit of the top and do it in 2 layers. 1 Link to comment Share on other sites More sharing options...
gavztheouch Posted April 27 Author Share Posted April 27 Screeding today Link to comment Share on other sites More sharing options...
Duncan62 Posted April 27 Share Posted April 27 1 hour ago, gavztheouch said: Screeding today How thick is the screed layer you are laying? Link to comment Share on other sites More sharing options...
gavztheouch Posted April 27 Author Share Posted April 27 Not very thick, about 50mm 20 minutes ago, Duncan62 said: How thick is the screed layer you are laying? Link to comment Share on other sites More sharing options...
Duncan62 Posted April 28 Share Posted April 28 11 hours ago, gavztheouch said: Not very thick, about 50mm Looks like a nice job 👍 Link to comment Share on other sites More sharing options...
gavztheouch Posted May 3 Author Share Posted May 3 Isoquick laid, feels like a bit of a milestone. Next is dpm and rebar 4 Link to comment Share on other sites More sharing options...
gavztheouch Posted May 30 Author Share Posted May 30 DPM and first layer of mesh. 1 Link to comment Share on other sites More sharing options...
Nickfromwales Posted May 30 Share Posted May 30 On 02/10/2023 at 07:42, gavztheouch said: About to start my isoquick foundation about 110m2. On 03/05/2024 at 16:49, gavztheouch said: Isoquick laid, feels like a bit of a milestone. Next is dpm and rebar 🍻🥳 28 minutes ago, gavztheouch said: DPM and first layer of mesh. Looks like a very neat job, and I see you've sleeved the 110mm pipes so you retain some "wiggle-room" I assume? 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now