nod

Yes I do You may find that you have do this twice Once to take you flush with the bracing Then the next will allow you to set out at 600 centers But I would get all your 70 mil kingspan in first

It didn’t really take me that long ?

Yes nogs under the sole plate Your easy way for the underside of the slope would be to counter baton with 75x25 mi This will give you fixing for stud and PB and leav a void for insulation

If all the above Extremely cheap

H

Flexi tile adhesive

If you are still wanting to get a tight bed It won’t really matter what you use

Ordered Friday Told Tues Weds After I had paid They keep blaming Amazon for taking all the delivery slots ???

Screwfix have become really bad for doing this

The tiles will stay down fine on a shallow bed Tge problem you will have is laying them flat We normally allow 18 mil for tiles of that size If you are struggling it may be worth using a smaller tile

Yes you can Leaving 20 mil around the other edges is more than sufficient to allow for any movement

18 mil is to tight You will still have to back butter the tiles

Trick is to give it a coat let it go in Then mix a small amount for the second coat It will smooth out easier Looks a pretty good effort to me though

It’s usually where the plaster is thicker Beads and joint and hasn’t Dried properly Perhaps worth sanding then repainting

Still damp when painted

Not good

TF especially we put breaks in the cement board with expansion joints Usually under and above a window

Every 10 metres Block-work also It will be on your working drawings

Are they always so loud We did the plastering and rendering on 60 houses Most where in blocks of 4 or 6 All had a unit directly next to the patios Many where back to back

Yep delivered

Hardly ever see mixers on site now Silo or tub

Yes he did Some do and some are happy with pictures Though any of us would have to be pretty stupid to cheat on this So pictures should be fine

You will need to put a membrane below your insulation and attach it to your wall dpc It’s worth putting a slip membrane on the top also BC will want to see all this before the screed is laid and should be very keen that everything is done right

I don’t I had to use all sash I rarely come across window fitters that are neat The price they get paid is a fraction of what the customer pays Its not exactly a trade fitting windows As it’s so easy to fit to new buildings Especially TF You will also find that most of the high end kitchen companies are not keen on supply only either