Jump to content

Signed off


Gone West

Recommended Posts

The BCO came yesterday for his final visit and to let me know what remaining documentation he wanted. He couldn't believe the air tightness of 0.47m3/m2.h as it was the lowest he had seen and that he usually saw results around the 4m3/m2.h. I didn't think it was especially low, but it was a point in my favour. Today I received the completion certificate, so now I can insure it as a normal house and start the VAT reclaim. I can only praise the experience I had with Building Control.

  • Like 6
  • Thanks 1
Link to comment
Share on other sites

Congratulations to you both. I saw it part finished and it was fantastic. I'm sure it looks even better now.

 

Hoping that everytime I use my wall mounted wc I'll think of you and it'll inspire me! 

 

(To those unaware Peter kindly gave me a couple of his surplus Geberit fittings :) )

  • Thanks 1
Link to comment
Share on other sites

14 minutes ago, Onoff said:

Hoping that everytime I use my wall mounted wc I'll think of you and it'll inspire me! 

Using it without finishing it might leave you with the odd, very odd, puddle although I agree you will be inspired.:D

Link to comment
Share on other sites

2 hours ago, Onoff said:

Congratulations to you both. I saw it part finished and it was fantastic.

I was fortunate to be able to visit recently and whilst there is some work still to be done it is a credit to them both, it is luverlly.

  • Thanks 1
Link to comment
Share on other sites

13 hours ago, Russell griffiths said:

you have probably got another pile of paperwork to deal with when you start the demolition. ?

The BCO said I just had to fill in a Section 80 form, which is only one page, and it doesn't cost anything. Mind you taking it down will cost a lot more.

Link to comment
Share on other sites

51 minutes ago, Moira Niedzwiecka said:

Hi Peter,

Your house is inspirational.

Congratulations.

Is the genvex combi working as you had hoped?

I am still undecided about my MVHR & DHW.

Thank you Moira. Yes the Genvex is working fine. Looking at the specifications for the Combi185 I think the small one 'S' would only work in a well insulated flat and the larger one 'LS', which we have, would only work in a well insulated small house like ours. I did look into using a Sunamp PV and separate MVHR near the end but the ventilation and DHW side of the build were too far advanced to change things.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...