Best way to fix this mess

[Alwayslearning22]

 Hey guys I need some help if you can

What’s the best way to repair this hole around the cable in meter box? I think they used a hammer to make there hole. 
 

thanks 

[JohnMo]

Trim the white plastic to be tidy. Mix some self levelling compound and pour in. Have a cup of tea/coffe

[Alwayslearning22]

5 hours ago, JohnMo said:

Trim the white plastic to be tidy. Mix some self levelling compound and pour in. Have a cup of tea/

self leveling will work on a plastic meter box? 

[Mr Punter]

A sparky might comment but I think the blue and brown wires need more protection - like trunking.

[JohnMo]

12 minutes ago, Alwayslearning22 said:

self leveling will work on a plastic meter box? 

Why would it go in a plastic box, isn't the repair to the concrete floor? If they were hitting the plastic box with hammer there wouldn't be a plastic box in the photo 

[Alwayslearning22]

[JohnMo]

A bit of silicone and a wet finger?

[Roundtuit]

Does it need repairing?  What do you want to achieve?

[Alwayslearning22]

If rats or mice get up the hockey stick pipe beside it  they could enter the cavity? 

Edited yesterday at 20:58 by Alwayslearning22

[Nickfromwales]

5 hours ago, Mr Punter said:

A sparky might comment but I think the blue and brown wires need more protection - like trunking.

I've zero idea of what I'm looking at. Is the cable regular twin and earth (T&E), as it appears to me to be so.

 

If it is, then it's a dangerous install. This needs to be in "containment", so as @Mr Punter suggests it needs conduit or trunking.

 

Even if this is temporary it is dogshit on toast, and the bread was out of date.

[Nickfromwales]

5 hours ago, JohnMo said:

Mix some self levelling compound and pour in.

What have I told you about drinking during the day?  

[Marvin]

That's non setting electrical putty

 

https://www.google.com/aclk?sa=L&ai=DChsSEwjV_aGfyr6TAxXzjFAGHbGsIjYYACICCAEQAxoCZGc&co=1&ase=2&gclid=CjwKCAjwspPOBhB9EiwATFbi5BkanPos5dLixv0wSp1V_3WAHOacGQ1jnwucOEUEE5d2-PmOgYSP0RoCFW8QAvD_BwE&cce=2&category=acrcp_v1_32&sig=AOD64_1l9R1G1FCGLV_DOlYmv6FsI1sd3g&ctype=5&q=&nis=4&ved=2ahUKEwja35Wfyr6TAxWeQUEAHfLbLX0Q9aACKAB6BAgFEB4&adurl=

 

Edited yesterday at 22:11 by Marvin

[dpmiller]

are there only two lives going into that box?

[Alwayslearning22]

13 hours ago, Nickfromwales said:

I've zero idea of what I'm looking at. Is the cable regular twin and earth (T&E), as it appears to me to be so.

 

If it is, then it's a dangerous install. This needs to be in "containment", so as @Mr Punter suggests it needs conduit or trunking.

 

Even if this is temporary it is dogshit on toast, and the bread was out of date.

My previous house looked like this too 

seems to be the standard around here 

[Alwayslearning22]

12 hours ago, dpmiller said:

are there only two lives going into that box?

Yes appears to be. Is that not right? I have solar panels. Has that anything to do with it 

[sgt_woulds]

@alwayslearning22  is this the finished install or did you take the photo when the Sparky was till working on it?

 

Has it been left with the cover missing on the box above?

 

If this is the case, then as well as the single insulated tails it has left live terminals exposed and the cables connected to the unit above are dangling from the terminals rather than being mechanically supported by a gland.

 

This is all kind of wrong!

[sgt_woulds]

For some reason I cannot zoom into the photo.  Also, it would be good to have a shot from further back showing the whole installation.

[Nickfromwales]

21 hours ago, dpmiller said:

are there only two lives going into that box?

It's to de-rate the outgoing supply, so L > SP MCB > final destination.

 

The cable feeding the MCB should be able to take the current of the supply so it's not looking up to par.

[SimonD]

On 26/03/2026 at 16:23, JohnMo said:

A bit of silicone and a wet finger?

 

I don't think I'd be sticking a wet finger anywhere near that installation 🙄

57 minutes ago, Nickfromwales said:

The cable feeding the MCB should be able to take the current of the supply so it's not looking up to par.

 

The whole thing look bl**dy awful.

[Nickfromwales]

13 minutes ago, SimonD said:

 

I don't think I'd be sticking a wet finger anywhere near that installation 🙄

 

The whole thing look bl**dy awful.

I was wondering why the test certificate had pictures of the Mr. Men on it. lol.