SIPs quote

[Kevan Marshall]

Just had a quote for supply and erection of SIPs house, my house is 180sqm ground floor area with provision to convert loft 70sqm at later date, external walls 197mm SIP panels to give U value of 0.13 or 172mm SIP panels plus 25mm PIR internal insulation to give U value of 0.12, roof is of vaulted truss system with steels in to support and boarded out and insulated to 0.12, all supporting stud walls are supplied, posi joists are supplied for loft conversion and floor boarded out, all wall and roof locations made airtight and battened out for service void ready to plasterboard, all exterior areas made weather tight, all crane hire, delivery costs included, airtight test done after I fit windows, all paperwork done for building control, with quite a lot of structural support walls going in leaves me very few stud walls to put in after installation of screed floor, I am waiting on quotes from two other SIPs companies but does this seem a reasonable price at 100k?

 

kind regards,

Kevan.

[Russell griffiths]

What score do they say they will achieve with the airtightness test. 

[Nickfromwales]

18 hours ago, Kevan Marshall said:

Just had a quote for supply and erection of SIPs house, my house is 180sqm ground floor area with provision to convert loft 70sqm at later date, external walls 197mm SIP panels to give U value of 0.13 or 172mm SIP panels plus 25mm PIR internal insulation to give U value of 0.12, roof is of vaulted truss system with steels in to support and boarded out and insulated to 0.12, all supporting stud walls are supplied, posi joists are supplied for loft conversion and floor boarded out, all wall and roof locations made airtight and battened out for service void ready to plasterboard, all exterior areas made weather tight, all crane hire, delivery costs included, airtight test done after I fit windows, all paperwork done for building control, with quite a lot of structural support walls going in leaves me very few stud walls to put in after installation of screed floor, I am waiting on quotes from two other SIPs companies but does this seem a reasonable price at 100k?

 

kind regards,

Kevan.

Doesn’t sound terrible tbh, but I’m just not a fan of SIP’s vs a proper timber frame blown full of cellulose.

 

Have you read the small print twenty times? Usually you’ll be responsible for a lot of stuff and you need that costed out before you take one more step forward, so you have a high level project cost.

 

I was going to ask about the promised AT score, but I’m assuming 1.0ach or close to? 

[Kevan Marshall]

15 hours ago, Russell griffiths said:

What score do they say they will achieve with the airtightness test. 

They have told me AT shall be well within limits, as long as I install good quality triple glazing then it should be up into passive standard 

[Kevan Marshall]

3 hours ago, Nickfromwales said:

Doesn’t sound terrible tbh, but I’m just not a fan of SIP’s vs a proper timber frame blown full of cellulose.

 

Have you read the small print twenty times? Usually you’ll be responsible for a lot of stuff and you need that costed out before you take one more step forward, so you have a high level project cost.

 

I was going to ask about the promised AT score, but I’m assuming 1.0ach or close to? 

Yes, even on the quote they are 100% clear what they are responsible for and what I am responsible for, only thing I want to ensure is that window sizes as per drawing are within tolerance and if windows do not fit due to incorrect sizes then they shall be responsible, they assure me they have never had any issues before and windows/doors can be ordered during  kit manufacture 

kind regards,

Kevan.