Jump to content

Recommended Posts

Posted

Tomato, tomaydo, potahto potayto, Bosch, DeWalt, Durisol, Izodom.

Customers are responsible for their own purchase decisions. And everyone needs to do their Due Diligence. Thoroughly.

Posted
  On 31/03/2022 at 08:21, dpmiller said:

OP, why not just flush the system, replace the PHE, and carry on- for now?

Expand  

That’s the quickest route to get up and running, even if that goes on to borrowed time again. Then the immediate pressure will be off you, and we can work on a solution / investigation of what is actually causing this contamination. I’ve pulled out 20 year old systems with less crud in them tbh.

Was the water that was flowing through that elbow ( in your pic ) potable water or primary heating water?

Posted
  On 29/03/2022 at 09:48, Nelliekins said:

This elbow was between the PHE and the cylinder, so I am expecting this throughout now...

Expand  

 

The elbow full of mineral deposits was in the recirculating side. This closed circuit was presumably filled originally from the same water supply that's constantly flowing fresh water through the other side of the PHE, heated to roughly the same temperature, so may well be be even more contaminated. It looks like extremely hard water to me. As I said earlier, a water softener would be one way to make this scheme work.

Posted
  On 31/03/2022 at 11:27, Radian said:

 

The elbow full of mineral deposits was in the recirculating side. This closed circuit was presumably filled originally from the same water supply that's constantly flowing fresh water through the other side of the PHE, heated to roughly the same temperature, so may well be be even more contaminated. It looks like extremely hard water to me. As I said earlier, a water softener would be one way to make this scheme work.

Expand  

 

That's the weird thing - our water is not that hard. I previously misread this information, and reported the Clarke value as PPM - it's actually 75ppm, which is still relatively low IIRC.

 

Circulating pump is coming out this afternoon to be inspected / cleaned.

 

water_quality.png

Posted
  On 24/03/2022 at 18:13, Nelliekins said:

The cylinder is being kept at approx 70C

Expand  

That's hotter than we've ever kept ours - lower would reduce hard water precipitation and improve boiler efficiency.  You won't get as many showers out of it, but a 30kW boiler could easily play catch up with a single shower output.

Posted
  On 31/03/2022 at 11:52, Nelliekins said:

 

That's the weird thing - our water is not that hard. I previously misread this information, and reported the Clarke value as PPM - it's actually 75ppm, which is still relatively low IIRC.

 

Circulating pump is coming out this afternoon to be inspected / cleaned.

 

water_quality.png

Expand  

 

Something's not adding up with that report. There seem to be some pockets of hard water nearby Chorley, maybe your getting your supply from one of those areas?

Hard%20Water%20Map%20of%20Uk.jpg

Posted

The statement from UU is that "the water supply to this area can vary in hardness from soft to slightly hard". That seems a total cop-out to me. But Worthington Lakes are literally 2 miles from our house (we are south of Chorley on the border with Greater Manchester) so there is every chance our village gets water from there. And the water there is definitely soft.

 

I might just get it tested, though, to be on the safe side!

Posted
  On 01/04/2022 at 07:44, dpmiller said:

and what's the filter and scale situation on it?

Expand  

Filter replaced every year, but only because of a note on the calendar. No noticeable issues with flow or water quality from the boiling water.

 

Tap itself gets cleaned maybe once a month, never noticed any scale on the end.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...