strideredc Posted December 19, 2019 Posted December 19, 2019 Hi, New to this forum... we moved away from the busy south east over to the west about 9 months ago and brought an old coach house (total floor area inside is about 90m2 downstairs so not huge but big for us) that was refurbed/converted in the late 70's! now needs refurbing again! Planning on putting UFH in throughout the downstairs (dig out job) and running it off a ASHP. It needs rewiring, repluming, replastering and a re laid roof! other than that its tip top! solid sandstone walls and freezing cold! I am an electrician by trade but not an expert in domestic as i work more in controls. Will post some pics soon... Already getting loads of ideas from this forum so thanks already!
ProDave Posted December 19, 2019 Posted December 19, 2019 Hi and welcome. It sounds like your expectations of what is needed to do it right are correct so you should be well prepared to make a good job of it. 1
joe90 Posted December 19, 2019 Posted December 19, 2019 Welcome, as we say to all newcomers, there is no such thing as a stupid question, stupid is not asking so ask away. 2
Gone West Posted December 20, 2019 Posted December 20, 2019 On 19/12/2019 at 19:38, strideredc said: we moved away from the busy south east over to the west Expand We're hoping to do that one day. Welcome to the forum by the way and good luck with the project. 1
scottishjohn Posted December 20, 2019 Posted December 20, 2019 On 19/12/2019 at 19:38, strideredc said: solid sandstone walls and freezing cold! Expand welcome to the forum sounds like you going for full 21stcentury upgrade lots of piccies please 1
strideredc Posted December 20, 2019 Author Posted December 20, 2019 These give an idea of what it is... (it looks much better than it is in the photos thats for sure!) 2
strideredc Posted December 20, 2019 Author Posted December 20, 2019 On 20/12/2019 at 08:37, PeterStarck said: We're hoping to do that one day. Welcome to the forum by the way and good luck with the project. Expand Best thing we have done but we are only 9 months in!... one of my ambitions is to never drive on the M25 ever again! unfortunately i am nowhere near that yet.... 1
ProDave Posted December 20, 2019 Posted December 20, 2019 On 20/12/2019 at 16:20, strideredc said: Best thing we have done but we are only 9 months in!... one of my ambitions is to never drive on the M25 ever again! unfortunately i am nowhere near that yet.... Expand I moved a lot further than you to achieve that. But even so I was down there this year, but only as a passenger on the M25 /M23
joth Posted December 20, 2019 Posted December 20, 2019 On 20/12/2019 at 16:17, strideredc said: These give an idea of what it is... (it looks much better than it is in the photos thats for sure!) Expand Welcome!! What are you going to do with all that gorgeous parquet? is the question everyone will be asking you from now until you put your UFH in. At least, it is for us. (Relatedly - anyone in need of 50m2 of gorgeous parquet? available in 3 weeks time.)
strideredc Posted December 20, 2019 Author Posted December 20, 2019 I read that back to myself and i meant that the pictures look much better than reality!!! its very tired... the conversion wasnt done that bad for the time but EVERYTHING done since then is a bodge!
strideredc Posted December 20, 2019 Author Posted December 20, 2019 On 20/12/2019 at 17:17, joth said: Welcome!! What are you going to do with all that gorgeous parquet? is the question everyone will be asking you from now until you put your UFH in. At least, it is for us. (Relatedly - anyone in need of 50m2 of gorgeous parquet? available in 3 weeks time.) Expand Kinderling! it looks better in the photos. some has shrunk and coming away (it was stuck down with black glue i imagine in sheets??). its about 7mm thick? do you recon its worth anything if i took it up carefully as there is about 44m2 of it? 18 minutes ago, joth said: Expand 1
strideredc Posted December 20, 2019 Author Posted December 20, 2019 It has a 'propper' 70's feel about it! the house was a coach house built in about 1890'ish+ for the manor house behind us about 100+m away... thats one of the reasons we brought it is we dont have any close neighbours! fed up living next to people moaning about our dogs ect ect (5 years of bad neighbours in the last place) we had to move out the south east as we could never afford even 1/4 of what we wanted down there.... it was talk and dream or do something about it.
Onoff Posted December 20, 2019 Posted December 20, 2019 Is that 1st floor slate cladding original, surely not?
Simplysimon Posted December 20, 2019 Posted December 20, 2019 On 20/12/2019 at 17:17, joth said: What are you going to do with all that gorgeous parquet? Expand work just lifted 7mx3m of mahogany parquet and dumped it before anyone knew.....
scottishjohn Posted December 20, 2019 Posted December 20, 2019 so -- what are you doing to general insulation spec if you are going to trouble of fitting UFH maybe strip walls back to stone work and make a nice new insulated envelope so your stone walls cannot chill the inside? just adding better heating is only half the job if you going to let it all dissapear through the stone walls. KEEPING THE HEAT IN WILL DRASTICALLY RDUCE THE AMOUNT OF HEAT ING YOU HAVE TO DO
strideredc Posted December 21, 2019 Author Posted December 21, 2019 (edited) On 20/12/2019 at 18:35, Onoff said: Is that 1st floor slate cladding original, surely not? Expand just realized what you meant... not it was the 70's conversion dorma, aka box on the back to contain the 3 upstairs bedrooms... Edited December 21, 2019 by strideredc
strideredc Posted December 21, 2019 Author Posted December 21, 2019 On 20/12/2019 at 19:22, scottishjohn said: so -- what are you doing to general insulation spec if you are going to trouble of fitting UFH maybe strip walls back to stone work and make a nice new insulated envelope so your stone walls cannot chill the inside? just adding better heating is only half the job if you going to let it all dissapear through the stone walls. KEEPING THE HEAT IN WILL DRASTICALLY RDUCE THE AMOUNT OF HEAT ING YOU HAVE TO DO Expand Thats the $1m question, i dont know? i was going to get the outside facing walls re lime and hemp plastered (original is in a bit of a state)but i really dont know what to do with it all. there was signs of damp but i cant see any damp now and thats after the worst rain in years here! all the walls are dry apart from downstairs bathroom thats clad in wood that prob rotten underneath! the thought of rewiring it give me nightmares and i am an electrician! I only have floorboards in either end of the house and none on the mezz! 2x dbs are needed at either end of the house with swa under the slab and a few ducts put in to get from one side to the other. because of the construction its almost impossible to get from one side to the other...
scottishjohn Posted December 21, 2019 Posted December 21, 2019 On 21/12/2019 at 11:09, strideredc said: Thats the $1m question, i dont know? i was going to get the outside facing walls re lime and hemp plastered (original is in a bit of a state)but i really dont know what to do with it all. there was signs of damp but i cant see any damp now and thats after the worst rain in years here! all the walls are dry apart from downstairs bathroom thats clad in wood that prob rotten underneath! the thought of rewiring it give me nightmares and i am an electrician! I only have floorboards in either end of the house and none on the mezz! 2x dbs are needed at either end of the house with swa under the slab and a few ducts put in to get from one side to the other. because of the construction its almost impossible to get from one side to the other... Expand well if you follow any of the trheads onhere what always conmes to the top is do it once do it right and "fabric first " when searching for effiency so why not go back ot stone walls -- and tan ktem or maybe get them sprayed with CLOSED cell foam - that is water proof and sorts the insualton at same tiem what ever you do isee it as imperative you sort the damp problems once and for all tough tio t looked like the oputside of house was cut stone showing not rendered in any way if its render then there are lots of water proof versions ,but you still need to up the insulation on other side of stonework lots of goggling for yuo to do
scottishjohn Posted December 21, 2019 Posted December 21, 2019 On 21/12/2019 at 16:09, scottishjohn said: the thought of rewiring it give me nightmares and i am an electrician! I only have floorboards in either end of the house and none on the mezz! 2x dbs are needed at either end of the house with swa under the slab and a few ducts put in to get from one side to the other. because of the construction its almost impossible to get from one side to the other.. Expand maybe time to make network of ducts for wiring in your new poured slab UFH floor -- make stud walls to run it all behind?
SteamyTea Posted December 24, 2019 Posted December 24, 2019 Welcome On 20/12/2019 at 16:20, strideredc said: one of my ambitions is to never drive on the M25 ever again Expand Last but one trip up country the M25 was blocked, so had to take the old route from Heathrow to Watford. It was painful. The M25 is so much better. I am 100 miles or so from the nearest motorway, oh how I miss them.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now