Pocster

And so the bidding war begins !

Almost !

That walk on glazing is affordable ?????

Poe cameras I link mine to cloud based Mangocam ; works well for off site monitoring .

Yeah I’m not sure what I should have to be honest . i was allowing 150mm insulation 50/60mm screed and ufh Then 20mm ( ish ) for tile and adhesive I also assumed a liquid self levelling screed . Screeder looking tomorrow see what he says ?

Lol ! I’ll get murdered in my sleep before then ?

So here’s the bathroom At far end shuttered section for inner timber frame for hidden cistern Directly in front where Porto loo is - the bath section . To the right shower tray area Plan is ufh and screed only go in the other area . So cistern , bath , shower dealt with at a later date ( like years from now ? ) Bit like brexit tbh ?

Not priced the screed yet but can guess . Now if only I could sell some glazing to pay for it ...

I believe that’s what the ufh company has said . Erm , that not the best ???

Perfect ! 100mm it is !

As if I know which one ! I *assumed* the depth required was pretty similar.

A breaker for 40 quid !!! It would break ! Got my Hilti for that !

Equation of faith goes like this : want bathroom + dont know exactly what suite + dont know what shower x not really sure how this is going to go / wife-factor Lots of variables not many constants ...

Better dig it up ?

Right ! It’s complicated ! Doing the ufh prep in the bathroom . How thick does the wall need to be to take a geberit hidden flush cistern ? Because we don’t know the exact size of our shower tray nor the bath type ( as in where the waste is or where the taps are ) i’m going to shutter out those areas so they have no ufh nor screed ; same for inner geberit wall . This a sensible plan given the situation? cheers

I’m ok then ? . Vcl ordered for non GF

Or girl friend ! ?

Ground floor ? Mine is “technically “ 1st floor

Pir isn’t eps though is it ?

You certainly have ! cheapest inc vat was around £54 You are in the money ?

150mm pir ordered ; cheapest I could find certainly not local builders merchants . Also found vcl ( looks the same as Permagard ) slightly cheaper . Double tape ( for vcl overlaps ) , tape for edges , foil tape all found cheaper on eBay

Done to @Onoff ‘s made up spec ! ?

Pir upstands done . Foam where I had to ; foil tape on joints . Osb on timber frame just so vcl has something easier to stick to .

Ufh company said expansion perimeter not required ; pir upstands good enough for that . Nearly done one room of upstands - not neat - but every piece of pir is an off cut left over - so free ? Mind you the 15 sheets of 150mm pir will be expensive ?

If I put expansion tape at the perimeter like this https://underfloorparts.co.uk/product/underfloor-heating-perimeter-50m-foam-edging-strip-5rolls/ Does it go under vcl or ontop it ? ( i’m Guessing ontop ! )