ToughButterCup

You ask for encouragement ... Somewhere ages and ages hence: Two roads diverged in a wood, and I— I took the one less traveled by, And that has made all the difference. The Road Not Taken, Robert Frost And if poetry isn't for you, then think of the time you will have to wonder ~ what if I had given it a go? All these years of 'What if' Most here have given it a try. Not all of it pleasant either. But everyone we meet even for a brief chat realises that self building adds something extra to your life. Something more than just the house. In my case, wrinkles.

Morning! Well, you've already covered three themes that occur here regularly. One of us already, then Welcome. Ian

@Onoff, thanks for the attachment, it is very helpful.

That sounds really smart Dave ~ Photo please!

We are about to buy our consumer unit(s)- which CU should I choose? And why? I have a pair of ruined hands so ease of access is important. Beyond that, we will be fitting RCBOS throughout. I look at Cus in Catalogues- and havent get a clue about what is good, bad or indifferent about them.

At last. The Internet used to share information: rather than the opposite.

And thats why I'd prefer to use cable with red and black strands. How would I know if the retification is done in the LEDs themselves (... more expensive I bet?)

? Thanks Its also the case that the "thingamajig" that takes a/c and makes it DC sometimes also called a driver isn't it? Why?

Thanks. Very helpful. So, its pick a colour then innit? I quite like violet .....

If @Jeremy Harris says he has a regret during his house build, I'd be daft not to learn from that experience. Here's what he said We are planning to have a backup battery system sometime soon(ish). But not yet. Prices need to come down a bit I think. Since we are planning to have two Consumer Units, will it be possible to put what we consider the essential circuits on one board, and the not-so essential circuits on the other board ? .... For example Oven, hob, fridge freezer, mvhr supply, washing machine, 5 amp lighting circuit and a few kitchen sockets on one board and the rest on the second board?

Can you give us an idea of how flat flat is Gary? I ask because our screed varies by two or three mm over 5 meters .....

Yes - LEDspace ( thanks to @PeterW) Its the profile selection that takes the time - almost too many to choose from

Thanks lads. Priceless stuff you learn here, priceless. Guess what I'd already gone and done ....?

DickHead (@AnonymousBosch ) walks into an electricians and asks for "Erm that two core cable stuff for connecting drivers - no transformers - to LED strips" "Well, sir would that be [ @Onoff @ProDave @Jeremy Harris babble - white noise, - feel like a pratt ] or perhaps simple bell wire?" " I dunno " I need to connect the transformer (some 12s, some 24 s to the LED- maximum length of cable, 2m, maximum lenght of LED 2m ) in such a way as I can swap out the driver when it decides to throw a hissy fit. I know what to use to connect the two core cable to the end of the LED strip. This section of the cable will be burried in the plaster, so I need to be sure to use red and black cable so I get the polarity right. Whats the CORRECT cable called ? Please. Pretty please. I just want not to look and sound like a right numbskull when I go to my suppliers.

? I'm tempted too. But I know I'd get the polarity wrong when I need to Swap the driver (...thanks @bitpipe)

I took the author to mean the gap between the OSB and the 2x2 ...?

Morning all. It's Friday! ? I smile to cover the embarrassment of not knowing what the cable that connects the LED strip to the driver is called. You know- I hope - the thin red and black stuff. Should it be solid or stranded?

Common sense always spoils a good story dunnit?

Hello: glad to have you with us. There is a kilt wearing contingent , they'll all be along soon.

You are in good company- that @Russell griffiths is famous for it.? For the MDF - use MRMDF (moisture resistant)

Knowing the despatcher well enough to ring and ask if any truck has a part load " left" . Yes I have to wait until Someone doesn't use as much as they'd ordered. But doing it that way saves everyone time and money

How does it compare? Takes me about 10 minutes to order the tail end of a part load ( half price), and a further 20 to chat to the driver, 5 minutes to wash up the coffee cups.

Welcome, I stopped bothering to calculate how much the combined advice of this forum has saved us when I got to £22000 ... and as for saving my sanity, well some say that's a lost cause. But simply knowing that to every single self-build problem, there's probably answer on BH is very reassuring. Welcome indeed.

Well well, well. You'll never guess what happened next ................... 10 minutes ago a guy from United Utilites Water came out and weighed the job up. I can't (well, shouldn't) report the language used, but he thought that the design was somewhat lacking in common sense. He agreed that a leaking packing gland in a valve was a foreseeable failure and that therefore the design I was asked to follow was not competent. The site was surveyed, marked up on the ground and a job logged inside 5 minutes. A few moments later I had a text notification that the job to insert an external stop valve had been raised . Lively discussions followed about Head Office people - in a wide variety of disciplines - not knowing what they are doing . The job might well be finished inside 5 working days. Result !Top Bloke! Lets see what happens next. Why oh why did UU try it on?

Ughhhh, what a tangled tale. The only defense I can see is -possibly- tiredness, and overtrading. Pressure to get the work done (I'm good at my job, but not the paperwork), and failure to appoint the right people to manage the paperwork. I'm so glad to hear that you have a solid background in dealing with this sort of issue: frankly its a relief. We sometimes get members who are not up to dealing with unscrupulous trading practice. BH has supported me too - saved me a huge amount of money. So its good to be able to return some of the help I've been given. Good luck with the rest of the process! Ian