nod

Get some plans drawn and apply for planning permission would be a good start Caravan last resort 😁

It’s not easy taking apprentices on Especially now with a minimum site age of 18 email from day release collage

Well done All the stress behind you The enjoyable bit ahead Good luck

It’s probably time to bite the bullet and get a planning consultant to submit for you Planning consultants normally run rings at round planners Planners seem to enjoy doing what they are doing to you

Why don’t you just sit the stone lintel in a catnic

You could add a end panel and fix it over the damage

I run a limited company and have looked into this While the vat isn’t an issue There’s very little you can do to sidestep paying 40% tax

If it’s Vance He buys everything in from China

No need to seal

Will count as outgoing s unfortunately

Try not to fit the advice to what you where already going to do Conor is spot on by assuming the worst Pennies compared to other extras that will crop up

Should be ok You May have to clip some off the top of the slate as you go As it tends to foul the the top baton

Yep Kevin and GD have joined the woke brigade I thought Kevin should have hugged at the end Seriously there are lots of programs like this without adding to them

3 times now 😂

What’s happened to GDs Sad stories Seems to be following programs like the workshop Bring back building the dream

I’ve no experience of Cedral But have used lots of Hardy Really easy to cut and fix I did the cladding on four about 15 years ago Still look fine Get some sample of each Also look at the warranty

we used medium density block and we went with full fill aAs there was a fire at the German factory where the insulation boards where made and all the major house builders bought the remaining stock I chose to use insulated plasterboard on the external was As I’ve done with the current build Magnetic plaster on the study and children’s bedrooms Wet plaster can have a cold feel to it I run a plastering business and we are still asked for sand and cement + skim on occasion Definitely better for fixing to and similar price to dot and dab

We’ve used solid concrete blocks for the last two

The UFH should be switched off during tiling and left off for a week after grouting Then crank it back up to required temperature

That will do Send me the number pls I couldn’t get the house anymore airtight I think this is what all the sites are doing now

Thanks I was sure our previous was zero rated No being told it’s a professional service Just like an Architect was the term 😂 can you share the company you used ?

Air test Vatable ?

I normally run a meter apron around all the walls