Skip to content
View in the app

A better way to browse. Learn more.

BuildHub.org.uk

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Kingspan heating (or lack of) issue

Featured Replies

never minding what the flow switch is saying, are you sure there's enough actual flow?

  • 1 year later...
  • Replies 124
  • Views 32.5k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • I'd buy some PCB mount 1/4" tabs, whip the relay out and make up some fly-leads...

  • Jeremy Harris
    Jeremy Harris

    I'm not entirely sure all the manual information available is 100% accurate, to be honest.  At best some of it is confusing, at worst some of it is just wrong.  I ended up drawing my own diagram for t

  • Jeremy Harris
    Jeremy Harris

    There may be space to fit it inside the case, as the case etc is the same as the other Carrier units.  The pump in mine is at the bottom right hand corner of the case, you may find there is a space th

Posted Images

Dear honourable members

I didn't want to start new topic since my question is about Kingspan Aeromax Plus (KHP0042) 15KW heat pump which was discussed here.

 

My power relay failed and I'm struggling to source one. Would you have any pointers where to get one?

 

Relay in question: DA2U 12VDC 23A 277VAC (picture attached)

 

I can find 24V version on aliexpress but that's as far as I could get. Tried RS components and other major UK retailers but with no luck...

 

image.png.07d90c4e97093d5ce68f8720d00562aa.png

Does it plug into a PCB?  If so it really has to be that exact size and shape.

 

Or does it just mount somewhere and 4 separate wires with a female spade connector plug onto it?  If so I would just be looking for any relay of the appropriate rating regardless of shape and size.

 

Even if it is a PCB mount setup, it would be easy to make fly leads to connect to any relay.

 

That relay looks very like automotive relays, have you looked at those?

Thanks for all replays! I have checked all the links suggested.

 

Unfortunately it's soldered into PCB 6 pin 12VDC power relay. Plug in ones wouldn't fit without some serous modifications.

 

I'll keep searching...

13 hours ago, ProDave said:

Does it plug into a PCB?  If so it really has to be that exact size and shape.

 

Or does it just mount somewhere and 4 separate wires with a female spade connector plug onto it?  If so I would just be looking for any relay of the appropriate rating regardless of shape and size.

 

Even if it is a PCB mount setup, it would be easy to make fly leads to connect to any relay.

 

That relay looks very like automotive relays, have you looked at those?

Hi! It plugs into PCB (soldered). Yeah, it really has to be same size or your suggested mods required.

 

I'm hopeful to source one before modifying PCB...

1 hour ago, AlexWithKingspanHeatPump said:

Hi! It plugs into PCB (soldered). Yeah, it really has to be same size or your suggested mods required.

 

I'm hopeful to source one before modifying PCB...

I'd buy some PCB mount 1/4" tabs, whip the relay out and make up some fly-leads...

1 hour ago, AlexWithKingspanHeatPump said:

I hope alternative relays work? Would Inverter not throw a fault because 12V coil has different resistance?

Absolutely not…. I build stuff like this all day at work and we’d never consider measuring the current through the coil of a relay. It would just be a mosfet that drives the coil.

  • 2 weeks later...

Replaced faulty relay with one from a car but can't get it to test it as Heatpump shows error 09 - Flow Switch error. Heat pump was empty for a while and I wonder if flow switch got affected?

 

Will replace flow switch to see if it finally works. Bought this heatpump second hand and don't know the history...

If you get in touch with Brendon Uys of Heacol (Google will help you find his details), he has just removed a kingspan aeromax that had hydronic failure. Apparently the electronics were ok. Might be of use.

On 27/12/2022 at 22:07, HughF said:

If you get in touch with Brendon Uys of Heacol (Google will help you find his details), he has just removed a kingspan aeromax that had hydronic failure. Apparently the electronics were ok. Might be of use.

Email sent! Thanks for info. Do you know if it was 15KW Heat Pump?

42 minutes ago, AlexWithKingspanHeatPump said:

Email sent! Thanks for info. Do you know if it was 15KW Heat Pump?

I don’t think so, I think it was a smaller one. Probably the same pcb inside though.

Edited by HughF

1 hour ago, AlexWithKingspanHeatPump said:

Hi!

Does anybody know if flow switch is the switch (closes or opens circuit) or it returns resistance when flow is over 8L/min? 

 

Thanks!

Usually just a switch.

16 hours ago, ProDave said:

Usually just a switch.

 

You are right, I finally found a drawing and it is just a switch which is connected to J17 on this particular model.

 

image.thumb.png.dd81b664e2a168bc8f7589606987f0d8.png

Hi all

just an update on second hand heat pump I was trying to bring back to life. I shorted the flow switch and heat pump started to work. I will order a new switch and hopefully that will be it.

 

Heat pump's heat exchanger covered with ice in very short period of time (30min) what would that mean?

 

I have heat pump connected to water underfloor heating only and it was off all this time with antifreeze in the pipes. It was -10°C last night.

 

Does anyone know how can I change the settings so it works only for heating and not with hot water storage tank? My setup sketch below:

image.png.7ac23fe7eae3ed443fa6ca0da9195f17.png

  • 4 months later...

Glad to hear positive news!

for anyone else in the future, can you give more info on how it was resolved 

  • 2 weeks later...
On 18/05/2023 at 21:19, TonyT said:

Glad to hear positive news!

for anyone else in the future, can you give more info on how it was resolved 

Sure! Three things really!

1. Main power relay was changed as it was damaged. I soldered in just random car 12VDC power relay 40A rated. I couldn't source power relay on its own, so had to improvise. For some reason there were no issues getting 24V coil ones but not 12V. Original relay had 20A 250VAC contacts, car relay has 40A 12VDC contacts and it works no problem.

2. Flow switch was faulty and didn't allow for pump to kick in. Shorted it out for test purpose and it worked. New flow switch on order.

3. Fuse was blown on flow switch board. Changed it and off it went.

 

FYI, Kingspan programmer (part number: KHP008) is exactly the same as carrier programmer Carrier-33aw-Cs1. You can find a manual for it here: https://www.manualslib.com/manual/1039100/Carrier-33aw-Cs1.html#manual

 

Hope it helps...

Create an account or sign in to comment

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.