Sink plug stuck - help!

[AdamD]

Plug broken so doesn’t work properly but unfortunately it’s been pushed down a bit too far, absolutely no idea how to get it out - any ideas appreciated!

 

thanks 

[Mr Punter]

Is there anyone around that you can blame?

[AdamD]

18 minutes ago, Mr Punter said:

Is there anyone around that you can blame?

The kids, but being 4 and 2 I can blame them but not much they can do 😂

[JohnMo]

Go from underneath take the u bend off to get access.  

[AdamD]

Just now, JohnMo said:

Go from underneath take the u bend off to get access.  

Yeah I assumed that, take it off and just push it all up?

[JohnMo]

Or just unscrew the whole metal piece and replace with new assembly - you seem to find spares for this stuff

[AdamD]

Can’t seem to get the mechanism out. Haven’t got a spanner big enough to loosen the black bit - any ideas?

[Gone West]

6 minutes ago, AdamD said:

any ideas?

 

https://www.screwfix.com/p/magnusson-water-pump-pliers-10-254mm-/1791v

 

[AdamD]

Once I’ve got that loose, should the whole mechanism come out fairly easily?

[Mr Punter]

I think if you unscrew the white waste pipe - which you should be able to do by hand - you may be able to get to the waste from underneath.  Failing that, you may need to replace the waste.  Is it a clicker one?

[Russell griffiths]

Easier and quicker to go and buy a new pop up waste and fit it, 15 minute job. 

[AdamD]

26 minutes ago, Mr Punter said:

I think if you unscrew the white waste pipe - which you should be able to do by hand - you may be able to get to the waste from underneath.  Failing that, you may need to replace the waste.  Is it a clicker one?

Yeah clicker one. Took the waste off but couldn’t get to it, argh!

[Onoff]

2 hours ago, AdamD said:

hanism out. Haven’t got a spanner big enough to loosen the black bit - any ideas?

 

Buy a 3D printer and print a spanner!

[MPH243]

If you can turn the push down plug bit it can be unscrewed to change the push bit. A suction cup might pull it up if it's strong enough?

[marshian]

1 hour ago, MPH243 said:

If you can turn the push down plug bit it can be unscrewed to change the push bit. A suction cup might pull it up if it's strong enough?

this exactly what I did when Mrs Alien used all her strength to jam it down - once out the sink stayed without a plug for months

 

It doesn't help when she uses bleach every week down plug holes - eventually I replaced it with a swivel type (o ring seal) 

 

that also got bleached and the o ring swelled up so now doesn't close nicely - bloody woman thinks the solution to every cleaning is bleach - half my house maintenance tasks are replacing stuff ruined by bleach!!!!

[saveasteading]

10 hours ago, marshian said:

used all her strength to jam it down 

In her defence... I have some that work well after the 10 years or more since installation, some that no longer click but screw out, and some that are permanently up. Some of these appear to simply be rubbish products. I'd suggest only buying well known   brands or from a plumbers' merchant rather than the other well known outlets.