junglejim Posted July 23 Share Posted July 23 Looking for recommendations on how to attach the breather membrane beneath counter batten. I’m thinking staples but worried about compromising the fabric. any tips? Link to comment Share on other sites More sharing options...
nod Posted July 23 Share Posted July 23 Staples are fine Link to comment Share on other sites More sharing options...
junglejim Posted July 24 Author Share Posted July 24 I’ve read somewhere about using staples ands tape to attach membrane and mark stud locations. In struggling to picture this. Any ideas? Link to comment Share on other sites More sharing options...
Russell griffiths Posted July 24 Share Posted July 24 If your putting a counter batten on your going to be punching dozens of holes in the membrane the staples are only to hold it in place while you fit the counter batten. you can get a butyl tape that fits on the back of the counter batten to seal any penetrations. I’ve never seen anyone use it. Link to comment Share on other sites More sharing options...
junglejim Posted July 24 Author Share Posted July 24 22 minutes ago, Russell griffiths said: If your putting a counter batten on your going to be punching dozens of holes in the membrane the staples are only to hold it in place while you fit the counter batten. you can get a butyl tape that fits on the back of the counter batten to seal any penetrations. I’ve never seen anyone use it. Thanks. That’s interesting so should I be aiming to staple where the counter batten will be positioned? Link to comment Share on other sites More sharing options...
Redbeard Posted July 24 Share Posted July 24 There are 2 schools of thought: 1. A hole with a fixing in it (a staple in this case) is not a hole at all and 2. (The more pessimistic one: A hole with a staple in might leave a residual hole). Both are valid! If you are at all concerned get a roll of suitable external-grade air-tightness tape (I know this is not an a/t issue, but some tapes are waterproof too) and stick a small piece over each staple. Tedious, but you can tick that off and proceed to the next issue. The butyl tape would work too - double-sided for pref. A mall piece wherever a nail is going through and Robert is your parent's sibling. Link to comment Share on other sites More sharing options...
junglejim Posted July 24 Author Share Posted July 24 1 hour ago, Redbeard said: There are 2 schools of thought: 1. A hole with a fixing in it (a staple in this case) is not a hole at all and 2. (The more pessimistic one: A hole with a staple in might leave a residual hole). Both are valid! If you are at all concerned get a roll of suitable external-grade air-tightness tape (I know this is not an a/t issue, but some tapes are waterproof too) and stick a small piece over each staple. Tedious, but you can tick that off and proceed to the next issue. The butyl tape would work too - double-sided for pref. A mall piece wherever a nail is going through and Robert is your parent's sibling. Thanks, that’s really helpful. Can you recommend a stapler… the manual ones I’ve tried previously struggle to go into osb. Link to comment Share on other sites More sharing options...
Redbeard Posted July 24 Share Posted July 24 38 minutes ago, junglejim said: Thanks, that’s really helpful. Can you recommend a stapler… the manual ones I’ve tried previously struggle to go into osb. I regret not, but there are compressed air staplers starting at under £50 in places like 'ToolFixstation'. Of course you'd need to buy or hire a compressor but they exist to buy at £100+, and presumably might be useful to you in the next stages of the job. Link to comment Share on other sites More sharing options...
Tosh Posted July 24 Share Posted July 24 1 hour ago, junglejim said: Can you recommend a stapler… the manual ones I’ve tried previously struggle to go into osb. Hammer tacker Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now