Jump to content

Slate Roofing - DIY


Recommended Posts

Hi All

 

I've done a small amount of slating. I.e slated a few small workshop roofs etc. But I would not call myself an expert by any means.

However, I've been considering "having a bash" (Mmmm inappropriate choice of term :)) at doing my slate roof myself with the help of my nephew. The principle reason being nothing more than the sense of accomplishment and being able to say "I did that".

 

Its not a complicated roof, no valleys etc, just one straight ridge. The battens will be done by MBC. Two dormers (but no slate detail). The tiles we've chosen are "prime" and the supplier is telling me that they will need almost no grading. 

 

We will have to nail the slates. Slate hooks are forbidden on the National Park (heaven knows why!).

 

Talk me out of it? Risks (other than falling off the roof :))? Biting of more than I can chew? 

 

Edited by Barney12
Typo
Link to comment
Share on other sites

Well I'd guess that the fact you're even considering it means you feel fairly confident.

 

As long as you take your time and make sure you set out the bottom course correctly then it shouldn't be a problem, especially with no valleys etc.

 

Link to comment
Share on other sites

1 hour ago, RichS said:

 

As long as you take your time and make sure you set out the bottom course correctly then it shouldn't be a problem, especially with no valleys etc.

 

 

+1 to that. Our friendly local roofer, known round here as 'Gary the roofer' says that setting out the battens, checking for square, calculating the guages and getting the base row in exactly is the only way.

Link to comment
Share on other sites

If you have done a few small roofs already and it is battened out you should be OK.  As long as the battens are straight and you make sure you keep your slates to the middle of the batten when laying. Just check along the bottom of the slates you have laid now and then to make sure they look right.

Link to comment
Share on other sites

I've done three slate roofs, two smaller ones and one large (farmhouse) scantle slate roof.  Slates that are well graded and nailed or clipped to constant pitch battens are pretty easy to fit, there's a knack to cutting them, but after wasting a dozen or so you'll be OK. 

 

A scantle slate roof is a complete PITA, though, and I'd never think about doing one again.  It takes forever to sort out and plan, plus you need enough space for the pegs, and the battens will end up on a variable pitch, because of the mix of slate sizes as you go up the roof.

 

I only mention the issue with scantle slate, as it's traditional in Cornwall and Devon and I know some conservation areas still insist on it.

Link to comment
Share on other sites

3 minutes ago, JSHarris said:

 

I only mention the issue with scantle slate, as it's traditional in Cornwall and Devon and I know some conservation areas still insist on it.

 

Thanks. Thankfully the park are not quite that bad. We've had a Spanish prime 500x250 approved. 

The MBC guys are battening tommorow (yes Sunday) so I've got to decide on the headlap. So many decisions! 

 

Link to comment
Share on other sites

7 hours ago, Barney12 said:

 

Not a chance :( Natural slate only and the exact type, colour etc is subject to planning approval (which we now have).

 

Nulok works with natural slate - difference is that you just get the one lap rather than two. 

Link to comment
Share on other sites

  • 1 month later...

So here's the South roof.

 

The result of 3 days work by me and two friend20170716_132847021_iOS.thumb.jpg.5512e3b69a79982367186675d5946a60.jpgs. If you combined the knowledge of all three of us then I reckon you'd be half way to a pro roofer :) Actually one of the guys has done a lot of roofing but he's a bit agricultural, took me ages to convince him to use slate and half, he said it was fussy crap :D 

 

Note that we decided to scrap the sticky flashing stuff supplied with the GSE solar trays and instead went for lead. I think it was the right decision in our exposed position. I really don't like the way the flashing trays 'kick' the slates at the sides and top but if you install them to spec then there is nothing you can do about it. But I'm probably being fussy! If you're very observant you'll notice the colour difference on the slates below the solar PV. That's because even with two coats of patina oil as soon as it rained it chucked white residue all over the slates so I decided to clean it off. :/ 

 

How did we do? 

 

 

  • Like 5
Link to comment
Share on other sites

North roof now underway. The pitch change is where the metal seam roof was supposed to be going on the lower half. Ditched due to the incompetence of Tata steel and getting generally fed up! However, I'm quite pleased with how the slate is looking. The lead flashing at the pitch change actually breaks the roof up. 

 

Holly mother of feckinuss those tripple glazed Velux dormers were heavy. 60 kg a peice :/ 

 

IMG_1116.JPG.f630e06d5de42b520d1fa73d5c27558b.JPG

  • Like 3
Link to comment
Share on other sites

25 minutes ago, Mr Punter said:

A really good call doing it all in natural slate.  Looks great.  What did you use for the verges?

 

I used the Kytun dry verge.

Would have never known about it if it hadn't have been for this very forum!

It was an un-budgeted cost but I'm really pleased I went for it.

 

As an aside the "roofing specialist" at my nearest Jewson (Which is apparently a "super branch") had never heard of it.

Link to comment
Share on other sites

9 hours ago, Russell griffiths said:

Can I ask what problems you had with tata 

im thinking of using them but haven't made any contact yet. 

 

Slow to respond to enquiries, if at all.

Technically hopeless.

Promises broken.

40% price hike.

 

I wouldn't touch them with a 10ft barge pole!! 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...