Pocster

Nice drink ?

Just thinking out loud here .... Those window frames . They do have glass in them ??

I used vips in my ground level flat roof due to the minimal depth I had . The problem is they come in fixed sizes and obviously you can’t cut them ?

Looks like sewage

A man after my own heart. Not a penny wasted

If you look back in the thread I actually already told you them

152.441.46.1 is the boy ! ?

Attempting wc in main bathroom . It would seem supplied waste pipe isn’t long enough - assume geberit do a longer one

Sad (expletive deleted)er ! Get a life ! Go and sort Zoots heating , or door , or damp , or ......

As reported by Tesla app And of course is a recognised unit https://en.m.wikipedia.org/wiki/Kilowatt-hour

Got my HA code running . Heating for entire above ground if temp drops below 17c then off at 18c I deliberately did a tight range . Heating came on just after midnight , turned off just after 9am . So effectively I ‘leaked’ 1 degree in 9 hours ( outside temp now around 7c ) Electric consumption for yesterday was around 12kwh . Although not a particularly scientific test - that seems pretty good too me

Dgtvnjjnb gbbbn !

Cross post . I’ll count up tomorrow

I think I might split it A switch for non poe and a switch for poe . Then I can daisy chain off either to extend

I will actually need probably more than 48 ports - but not all poe

So my eBay cheapy netgear 48 port poe switch does the job. But ( as mentioned in a previous thread ) is noisy even though i replaced all 4 fans. (f16 take off!!!) I'm looking at maybe https://www.broadbandbuyer.com/products/38330-netgear-gs316pp-100eus/?gclid=EAIaIQobChMI1eXC663O7gIVSYBQBh2dTAoCEAQYASABEgJF1fD_BwE Only 16 ports but I can daisy chain them to add ports. Not sure if this is a good approach?. I need to also ( due to space ) wall mount flat against the wall. So potentially I could end up with 4 or more of these! Don't really want to spend 3k on some Cisco wonder that achieves 48 ports, poe and fanless!!! Guessing I can get away with an unmanaged switch. Don't need anything fancy. Low poe budget per port. Fanless was the real issue! Any advice welcome.

A finer phrase has never been said

I will ! . Just leaving it ‘exposed ‘ until I’m convinced it all works . House is so well insulated it’s still 19 degrees even though I turned them off at noon . Some HA code should turn them on once temp drops ( just as a test )

I had exactly the same ! use decoupling mat flexible adhesive flexible grout expansion strips in doorways ?

Cheeky (expletive deleted) ! That is neat ... FOR ME !

Ok, off site at the moment. Will try tomorrow!

ok Ill order one . But would appreciate a step by step approach when I do this . Just to make sure I don’t f it up ?

Erm ! Overload ? Will re read later . An Aladdin ? Does it need a rub ?

@PeterW that cheap eBay wiring centre you recommended seems to do the job brilliantly ????