-
Posts
14055 -
Joined
-
Last visited
-
Days Won
29
Everything posted by Pocster
-
-
Plumbings for girls ! Once again a few hours on a Friday = a weeks lack of productivity. Horizontal pipe a bit of a kink . Used ‘bits’ I found round the site ( bottle trap might be better tbh ) . Tested and works ! 👍 ( for now )
-
Can’t get 65 and 140 🫤 Tap *has* to go to the right and away from the back ( otherwise window won’t open past tap )
-
Had to notch for the waste ( lovely sink , waste and overflow Aldi plastic ) Do I need to silicone / ct1 under the sink lip ? . Feels pointless as worktop will be over it and sealed down anyway .
-
It’s in . Tap space will be awkward ( but always would be anyway ) . I will install them as a test ( bit of timber with hole in ) . To see how much of a pita it could be …
-
Few mm lower than worktop - assume not an issue . Left and right side not supported so will add more batton
-
-
Think I might rip that steel out and fix these “ come with the kitchen but no idea what they are for “ horizontals set down into the unit
-
-
Lol Got my sink ! I’m a bit tight for space !! This too far to the front ? Has to be hard to the left as tap has to be too right of sink
-
This is the downfall . I put my pipe cutters somewhere safe . 45 minutes to find them …
-
They are under the hammer that you can’t find
-
What screws for into the laminate ? Just standard wood screws ? - pre drill it ??
-
Yeah I was worried about screws . The panels are 18mm. Fear makes me worry that : Not enough bite if screw not deep enough Going through the panel !
-
Some big gaps between units so added noggins . Laminate panel goes right down that side . Assume glue ? ( ct1 ? ) . Will have to add vertical noggins on that white unit as otherwise nothing to bond too .
-
Off topic ? ( just my mind ! )
-
😙😗
-
No . It’s urine yellow silicone to match the urine coloured grout !
-
On that corner nothing . Pipework to feed shower etc. no where near .
-
Noticed this today on the wall corner outside the ensuite shower . Put my hand over it and a tiny smear of paint came off . Assume a leak is pushing the paint off . Ensuite shower corner looks ok but presumably not . Should I smear a line of clear ct1 down the corner and hope for the best ? plastic bead with ct1 behind it ? Just leave - so it gets worse but maybe more obvious to see where it’s leaking from ?
-
-
Isn’t this a scene from the mother Alien nest where she penetrates everyone ?
-
Nooooooooo ! I must find more levels !!! 🫤
-
