Skip to content
View in the app

A better way to browse. Learn more.

BuildHub.org.uk

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Help required wiring my ASHP/UFH

Featured Replies

31 minutes ago, joe90 said:

 

Right, my new computherm stat has arrived, but, (am I getting OCD ?), it’s ugly

What does it look like? 

  • Replies 257
  • Views 46.4k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • It Really is not my day, now my tractor won’t start, at least there is no electronics In that.

  • Would in not be a whole lot simpler if instead of labelling them A and B or DHW / Heating, they just labelled them NO (normally open) and NC (normally closed) like a relay?

  • For bleeding the floor loops you are best using a hose and bleeding each floor loop one at a time, with the valves to the rest of the system shut off.

Posted Images

  • Author

Also it’s very easy to up the temp so er indoors will be doing this as soon as I turn my back, the Wunda is more difficult to understand ?

image.jpg

image.jpg

Edited by joe90

I see what you mean... in this day and age there are a lot of better looking stats... and ones that you can programme in a ‘not to exceed’ temp (to stop others in the family cranking it up to max!)

Manuals available here. http://www.manuals.calorsol.de/

Personally I don't find it any uglier than the other one you show, but the silver finish looks a bit naff.

 

I've just installed 3 to de-computerise our UFH & towel rails to make it suitable for non geeky people. The only drawback for me is there are only 6 changes available, I'd like 8 for the towel rails.

29 minutes ago, joe90 said:

Also it’s very easy to up the temp so er indoors will be doing this as soon as I turn my back, the Wunda is more difficult to understand ?

 

So you need to be economical with the truth and tell the Mrs that cranking up the temp will blow the ASHP board again so leave it be unless you are there to ‘adjust’ the ASHP when needed to compensate ?. 

 

If she turns it up when you’re not around turn the heating off and say that it shorted out but luckily she hasn’t blown the board on that occasion but not to do it again. Who ever said women were devious ... ??

 

  • Author

@newhome And there’s me thinking you would give me grief for doing that.!!!!

 

well the good news is that the stat works (not blown up with the board) and I have successfully modified it to be dry contact (no voltages)

 

who,s a clever boy then ?

17 minutes ago, joe90 said:

And there’s me thinking you would give me grief for doing that.!!!!

 

Ha ha! Just thinking how I would react in that scenario. If someone said the stat was too difficult to understand I likely would have a look at the manual, but if @Nickfromwales or @PeterW had said ‘don’t touch that as it’ll blow the system’ I would (probably ?) leave it be. My OH used to always say ‘you won’t understand that’ when I used to ask about stuff and given that I wasn’t overly interested I used to leave him to it. Don’t have a choice now though so have to understand a bit more and even if I can’t physically do the job I’ve learned that people try it on a bit less if you demonstrate you have a little knowledge. 

 

54 minutes ago, joe90 said:

@newhome And there’s me thinking you would give me grief for doing that.!!!!

 

well the good news is that the stat works (not blown up with the board) and I have successfully modified it to be dry contact (no voltages)

 

who,s a clever boy then ?

I have done similar when someone bought the wrong boiler programmer. Simply cut a pcb track with a scalpel, and made an alternative soldered llink

Create an account or sign in to comment

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.