Jump to content

Recommended Posts

Posted
16 minutes ago, saveasteading said:

Can't do that.

Yes you can. In a previous role I installed a 50kW array on an agricultural barn. It's still running so one must assume the barn is still stanindg

Posted
22 minutes ago, SteamyTea said:

Points 2 through to 6 will just put the prices up so high it is not worth doing.

If you make the sticks big enough ....

Posted
12 minutes ago, saveasteading said:

I don't think they can

Then what is the point of the Scottish parliament. Better off spending the money on more turbines.

Posted
3 hours ago, Spinny said:

charging people 3 times as much to cook their tea at 6.30pm.

Thats perhaps intended as a distraction.

No, but they could get a reduced rate for using non- peak times. 

 

It's also common sense, as a no Investment solution. People are entitled to not turn on the cooker any time they choose.

 

 

 

Posted
1 minute ago, SteamyTea said:

what is the point of the Scottish parliament

Scotland has differing values and goals to a large extent. Hence a left wing government for a long period , despite the voting system being designed to prevent it.

So lots is different

And lots was not devolved.

 

In summary?

More collectivist and egalitarian. Eg social services.

Less of a class system

Naturally against privatisation.

 

 

Posted
1 hour ago, SteamyTea said:

Given a binary choice

Nothing is really binary. Have high speed trains powered by the wind turbines. Lay PV between tracks while your at it.

Posted
5 hours ago, Spinny said:

don't believe in charging people 3 times as much to cook their tea at 6.30pm.

That's only applicable to ToU tariffs. If you want no extra charges use a flat rate tariff. ToU tariffs are an option, you make your choice and then live by it. Our battery takes us through the expensive periods. Never use grid energy unless in a cheap period - until I mess up things, which happens to everyone.

  • Like 2
Posted
12 hours ago, JohnMo said:

Nothing is really binary. Have high speed trains powered by the wind turbines. Lay PV between tracks while your at it.

"Never answer the question that is asked of you. Answer the question that you wish had been asked of you."
Robert McNamara 

 

 

Posted
12 hours ago, JohnMo said:

That's only applicable to ToU tariffs. If you want no extra charges use a flat rate tariff. ToU tariffs are an option, you make your choice and then live by it. Our battery takes us through the expensive periods. Never use grid energy unless in a cheap period - until I mess up things, which happens to everyone.

Do you run your systems automatically, manually or semi manually. I guess I can see how you could 'mess up' in manual mode but how might you 'mess up' in the other two?

Posted

In round fully automatic via the inbuilt timers. But when I do an Axle VPP it is supposed do the setting changes automatically also, but has messed up leaving eco mode setting off instead of switching it back on. It's generally gone wrong when other so called systems were involved. Learning for was keep it simple.

Posted
13 hours ago, JohnMo said:

Nothing is really binary. Have high speed trains powered by the wind turbines. Lay PV between tracks while your at it.

PV panels laid flat (sub 12°) won’t ‘self-clean’. 

Posted (edited)
8 minutes ago, Nickfromwales said:

PV panels laid flat (sub 12°) won’t ‘self-clean’. 

True, but things have been developed to help - you can add capillary clips to help drain water and debris off.

 

image.png.e06ba699adea4e8b6a3ae42be1c99618.png

Edited by JohnMo
Posted
10 minutes ago, JohnMo said:

True, but things have been developed to help - you can add capillary clips to help drain water and debris off.

 

image.png.e06ba699adea4e8b6a3ae42be1c99618.png

You think manufacturers would simply omit 20-30mm sections of frame in all 4 corners, leaving the metal sides flush with the top of the glass to allow this runoff, but I suppose the glass edge is then too vulnerable.

Posted
3 minutes ago, Nickfromwales said:

You think manufacturers would simply omit 20-30mm sections of frame in all 4 corners, leaving the metal sides flush with the top of the glass to allow this runoff, but I suppose the glass edge is then too vulnerable.

They chase the last % efficiency but cannot do the simple things. I am going to install the previous image clips to my flat panels on a pergola roof to see what they do. There are two panels. Hadn't cleaned for over 6 months after cleaning made 110W difference in full sun, even though the panel were really mucky at the start.

Posted
4 minutes ago, JohnMo said:

They chase the last % efficiency but cannot do the simple things. I am going to install the previous image clips to my flat panels on a pergola roof to see what they do. There are two panels. Hadn't cleaned for over 6 months after cleaning made 110W difference in full sun, even though the panel were really mucky at the start.

110w improvement after cleaning?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...