puntloos Posted January 4, 2021 Posted January 4, 2021 So far, I've only encountered induction hobs whose actual heating rings are perhaps 10-15cm diameter. My largest pans are 30cm or such, which means that even though they claim to be heatspreading, food gets heated very unevenly, with anything in the center cooking (and then blackening) much faster than the rest. Does anyone have an induction hob where one-or-more of their burners actually is 30-ish cm? Or is that a physical impossibility somehow?
SteamyTea Posted January 4, 2021 Posted January 4, 2021 I have a Russel Hobbs RH601H401B, have no trouble at all, even with my very light, cheap and basic pots and pans. It is possible to burn stuff, but I just turn the power down to 1 or 2 and stuff simmers away nicely.
PeterW Posted January 4, 2021 Posted January 4, 2021 IKEA do one and it turns the whole of one side into a single zone. Also seen they have brought out one with a built in extractor - £1150..!! 1
daiking Posted January 4, 2021 Posted January 4, 2021 7 hours ago, puntloos said: Does anyone have an induction hob where one-or-more of their burners actually is 30-ish cm? Or is that a physical impossibility somehow? Yes. No. Big Neff here, £££
joth Posted January 4, 2021 Posted January 4, 2021 Bora Pure X has 150 and 180mm zones but you can bridge them to create a 240mm zone. I don't understand the maths at work there either
SuperJohnG Posted January 4, 2021 Posted January 4, 2021 21 minutes ago, joth said: Bora Pure X has 150 and 180mm zones but you can bridge them to create a 240mm zone. I don't understand the maths at work there either The bora ones look good. But they are so rubbish at supplying good information. It's all marketing fancy pictures rather than just writing down in simple words what it does.
AliG Posted January 4, 2021 Posted January 4, 2021 Siemens show multiple ones here that can work with a hob up to 30cm diameter, one even goes up to 32cm. The street prices seem to be in the £1150 range. https://www.siemens-home.bsh-group.com/uk/productlist/cooking-and-baking/hobs/induction-hobs
puntloos Posted January 4, 2021 Author Posted January 4, 2021 Thanks all, I guess I've just never been exposed to a modern induction hob Good to hear that some of them heat large areas, not just a hot-spot.
Ferdinand Posted January 4, 2021 Posted January 4, 2021 Here, for example, is a Siemens $£""%$£^$^$^$&&^%*&(*)_()&*&%^%%$£%$£%* with a Flexinduction Zone from Appliances Direct at £750, at 15% (already taken) off. https://www.appliancesdirect.co.uk/p/77641460%2f1%2fex879fvc1e/siemens-776414601ex879fvc1e-iq700-5-zone-induction-hob-hob F
daiking Posted January 4, 2021 Posted January 4, 2021 1 hour ago, Ferdinand said: Here, for example, is a Siemens $£""%$£^$^$^$&&^%*&(*)_()&*&%^%%$£%$£%* with a Flexinduction Zone from Appliances Direct at £750, at 15% (already taken) off. https://www.appliancesdirect.co.uk/p/77641460%2f1%2fex879fvc1e/siemens-776414601ex879fvc1e-iq700-5-zone-induction-hob-hob F If you read the blurb you’ll see the large centre ring is 240mm diameter which should be sufficient. to be honest I cannot think of any occasions we have needed either of the 2 flexi-zones we have and standard rings would not have sufficed and saves ££ in the process.
puntloos Posted January 4, 2021 Author Posted January 4, 2021 56 minutes ago, daiking said: If you read the blurb you’ll see the large centre ring is 240mm diameter which should be sufficient. to be honest I cannot think of any occasions we have needed either of the 2 flexi-zones we have and standard rings would not have sufficed and saves ££ in the process. Yeah the massive flexizone is overkill - I guess 24cm is fine-ish with the full pan diameter being 30 (at the top.. i think, so the base is probably pretty close to 25). I think my rings are 15cm. Result: Not the end of the world but annoying, not just with the pan but also while cooking.
daiking Posted January 4, 2021 Posted January 4, 2021 2 minutes ago, puntloos said: Yeah the massive flexizone is overkill - I guess 24cm is fine-ish with the full pan diameter being 30 (at the top.. i think, so the base is probably pretty close to 25). I think my rings are 15cm. Result: Not the end of the world but annoying, not just with the pan but also while cooking. Ours is 5 years old now but the current equivalent has a centre ring that 320mm diameter
SteamyTea Posted January 4, 2021 Posted January 4, 2021 I don't think there is any way to know the size of the induction coil without looking, not sure if the manufacturers want to show how simple the insides are.
Luke Salter Posted January 4, 2021 Posted January 4, 2021 The BORA X Pure has square induction coils which are 230x230mm when linked togther will be 460 x 230mm. All listed on the website. https://www.bora.com/fileadmin/downloads/327_datasheet_en_gb12965.pdf
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now