Pocster

So bed the fixing in the 1st base mortar and then drill/screw 2nd course to fixings ? That edge will have balustrade and also self supporting stair case will fix to it

Here’s the steel to make it clear . i just need a nice concrete base along its length ( and probably as wide ) I could just cement concrete blocks to it but i’m worried when they are drilled for fixings the vibrations will cause concrete block to disconnect from steel beam

No welding !!! ?

Hey Thanks for the replies . Not entirely sure what you guys mean . Will stick a photo up tomorrow. Did wonder if I could drill the steel and somehow bolt concrete blocks to it ...

It’s an internal steel whose function is just to provide support for the stairwell . I need to shutter the edge for ufh screed . But also need a good edge for fixing of balustrade and the actual staircase .

Hey all i need to build up a concrete plinth that happens to be on an internal steel . Whats the best way to attach concrete blocks to structural steel ? I could cement them but i’m Guessing that’s not the preferred way .... ?

And so the bidding war begins !

Almost !

That walk on glazing is affordable ?????

Poe cameras I link mine to cloud based Mangocam ; works well for off site monitoring .

Yeah I’m not sure what I should have to be honest . i was allowing 150mm insulation 50/60mm screed and ufh Then 20mm ( ish ) for tile and adhesive I also assumed a liquid self levelling screed . Screeder looking tomorrow see what he says ?

Lol ! I’ll get murdered in my sleep before then ?

So here’s the bathroom At far end shuttered section for inner timber frame for hidden cistern Directly in front where Porto loo is - the bath section . To the right shower tray area Plan is ufh and screed only go in the other area . So cistern , bath , shower dealt with at a later date ( like years from now ? ) Bit like brexit tbh ?

Not priced the screed yet but can guess . Now if only I could sell some glazing to pay for it ...

I believe that’s what the ufh company has said . Erm , that not the best ???

Perfect ! 100mm it is !

As if I know which one ! I *assumed* the depth required was pretty similar.

A breaker for 40 quid !!! It would break ! Got my Hilti for that !

Equation of faith goes like this : want bathroom + dont know exactly what suite + dont know what shower x not really sure how this is going to go / wife-factor Lots of variables not many constants ...

Better dig it up ?

Right ! It’s complicated ! Doing the ufh prep in the bathroom . How thick does the wall need to be to take a geberit hidden flush cistern ? Because we don’t know the exact size of our shower tray nor the bath type ( as in where the waste is or where the taps are ) i’m going to shutter out those areas so they have no ufh nor screed ; same for inner geberit wall . This a sensible plan given the situation? cheers

I’m ok then ? . Vcl ordered for non GF

Or girl friend ! ?

Ground floor ? Mine is “technically “ 1st floor

Pir isn’t eps though is it ?