Pocster

Glued bathroom sink waste together . Loosely clipped it to timber so I have some play ...

I believe I need this https://www.jtmplumbing.co.uk/pipe-fittings-c433/mcalpine-multifit-waste-c136/mcalpine-t16-trap-inlet-1-1-2-x-1-1-4-p22187

I'll order 2!

Ah ! Before purchase of cistern the style of push plate was ‘ unknown ‘ - so currently not bought any . That will be another decision for another day !! ?

Just mocking up the basin waste . Hard not to use a 90 degree tee . Looks like linking white waste pipe ( left poking through ) into black soil might be fun . How far ‘around’ the soil pipe should the boss strap be ? - I assume as high as possible ??

Can you please link me to the correct adaptor ?

ok ; I seem to need something that lets me connect the sink plug to the waste .... ?

Houston ! Check manifold of manifolds open Check inlet valve is dry Check bowl in place We are clear to flush - that’s clear to flush Houston ! Ah ! Bigger bowl required Houston ! Mission deemed successful !

Yeah elbow . I was talking all professional ? TBH I stood here thinking - I should fill the cavity behind with sound insulation stuff - like a true pro !!! ?

Warning warning ! Reaching point of commitment !! Water Hep2o inlet attached - waste in . Just got to sort Hep2o pipe to inlet . Looks like underneath I have no choice but a 90 degree tee . This is it for fitting the cistern I assume ....

Mine are 3 wire . Expensive still for a fan aren’t they

I’ve got loads of ct1 to use up ! ?

Sikaflex not ct1 ? Does it matter ??

That’s the type of hoist setup I was maybe thinking of .... But I think the hoists ‘legs’ might get in the way .

Yeah I need to ‘drop’ it in somehow . Well , not “drop” lol but “ place “ .....

Think I’ll do similar and glue and screw marine ply across the whole wall then mount the delta board . Not sure I want to screw into the geberit frame ! . Not brave enough for that ! . If I make the ply crossing the frame 1 continuous piece then I reckon it would be rock solid . Need to experiment a bit more before I commit ...

Yeah I know .

No , I’m guessing just the old corona ....

Funnily enough went to the builders merchants and bought bolts and nuts to fix as you did but from ‘outside’ into the frame . Not sure why I thought that would be better . Anyway whilst outside builders merchants I was then sick over their driveway ? - ( not joking ) - I must have caught something............. Have a headache now ..........

Found a thread on this already , mentioning ice cubes and battons My tray weighs an impressive 72kg . As I’m always on my own ( pre self isolate - I set the trend ) ; this won’t be much fun . Want to recess tray into floor . So once wall boarded with marine ply and tile backer board on ; need a nice method to get tray in and out of corner . Battens sound best . But tray won’t be easily liftable once in situ . Was thinking of some kind of hoist ...

No - I’m leaving them for you

Ouch again !

This might do it.... https://www.ebay.co.uk/itm/1PC-12V-Mini-Cooling-Computer-Fan-Small-40mm-x-10mm-DC-Brushless-3-pin-JC/193264503219?hash=item2cff7649b3:g:S9IAAOSwZ~pdzUUo#shpCntId

I'm actually having great difficulty finding the 5 replacement fans I need. Can find them on US eBay at £100 for 5 + postage!!!! https://www.ebay.co.uk/itm/Lot-5x-new-Quiet-fans-NETGEAR-ProSAFE-GS748TP-Low-noise-best-for-Home-Networking-/263162755852

The wall fixings for block work seem the right thickness and length Assume a visit to the builders merchants to get a similar size bolt , nut and washers will do the job