Pocster

Hi, 1) How do I connect MDPE to the main drain?. I can Tee these 2 together to make one connection. Currently just sat loose . This is for a rainwater pump. I can dig out the main drain pipe for what ever connections are required. 2) I’ve got a sump. Yet this 50mm flowplast connector won’t fit. What should I use ( want solvent weld ) as it’s sewage. Also need to connect to the same main drain as the MDPE pipes above. ta !

That’s what you said about mine

I’d get a person you don’t like and stand them against the glass . Then push them . Plenty of professionals will be out then

All @SteamyTea wants to do is “ give his neighbor “ some ; dirty bast …

You should pay more

Wanting me to do this (expletive deleted)ing job . Not like I’ve got anything else to do . Still , happy wife , happy life as they say …… ( not true of course 🤣 )

The (expletive deleted)er doesn’t move now

(expletive deleted)ing SWMBO

So I decided to do a sand/ cement mix at the base of the depression ( hole in the ground not my mental state ) . Seems fairly stable and level . Will water can around it now . As fear of it moving and poo pipe breaking I’ll even expanding foam the sides for peace of mind .

That doesn’t help . The issue is bedding the thing

Is a manhole riser a rude thing ?

The sump lid can be walked on so must be stable .,,.

I know . It didn’t want to give the impression you need a 2nd I.e external inverter ( so 3 in total ! 😁 )

Would that really do ? . Still need to ‘bed’ gorilla tub . Currently sump tub can ‘wobble ‘ around as base isn’t flat .

I’m not sure about your “ can’t meet demand “ quote . If my SE is set correctly and PW goes over it’s 5kw limit SE and/or PV take up the slack . So my maximum “load” is 5k (pw ) + SE (3.68k) . So I would assume multiple SE or PW ( other makes ) can provide greater loads combined ????

I have 1 inverter for all I.e pv , se , pw

Deep in the bowels of the earth I break out concrete so I can get a sump in . There’s no way I can get the base ‘smooth ‘ . How best to bed the sump so no sharp bits puncture it ? . Dry sand and cement mix ? - then gently allow water to soak in around the base ? Better method ? Keen eyed amongst you will notice that this job was too much for the black and gold team ( Dewalt ) so we called in the Hilti boy . Appreciate Makita users won’t be familiar with that and need to go back to their cocktail at the Pink Flamingo nightclub .

Good advice here . Initially I had a 4kw pv array and a PowerWall 2 . Really pleased with it . But before war and energy hikes I decided to get the array doubled and wanted more storage ( the aim being to never take from the grid at peak rate ) . As you mention PW wait times are 18 months + . I went for a SolarEdge battery . It’s a bit of a fiddle to get them to play nice - but is doable . I would choose your system now battery wise as you’ll be in a long queue anyway . PV as big as you can go . Inverter as large as DNO will allow would be my advice . As getting a battery is someway off I would get an EV sooner rather than later ( though they can be hard to come by ) . Objective being to export as little as possible .

If that does occur a photo will be posted up here asap !!

Just a wc and sink - thanks Presume the fused spur can be up the wall high I.e out of harms way ( but reachable of course )

Can’t find anything obvious online . Can it go straight back to the CU ? . Need a fused spur in the wc room or outside ? Don’t want bco pulling a face …. ( not that they’ll ever visit but just in case )

Just tell your installer you want full access . It really is easy get them to setup especially if you haven’t made full payment yet . It’s your system not his ….