Thorfun

It’s already purchased so that money is forgotten about.

Ok. Let’s say I went with the valves. What’s this wiring all about? Do I need a wiring centre? At the moment I have a single really cheap thermostat in the basement. So would I need a second thermostat upstairs? I know you said wireless but eventually I’ll have thermostats as part of the Loxone system so was trying to do thermostats on the cheap as they’ll eventually be superfluous to requirements! Wireless thermostats sound expensive.

This is the conclusion we came to as well. And there’s even less of a difference when they’re wet (I used the hose on them as it rains a lot in the UK I thought it was a good test to perform). So we went with the cheaper slate and our roofer was impressed with the quality and uniformity of them.

Come on Nick. You know I’m a tight ar$e. £119 x 2!! I’m sorely tempted to just turn off the basement ufh for now as it’ll be years before it’s a usable space. Then when I’m no longer on stupidly high self-build mortgage rates I might have some spare cash to get it all sorted. such is the life of a self builder.

cool. don't suppose you have any recommendations for such a product do you? I can purchase them in advance and have them here for when they attend and they can fit them.

got my slates from Jewson. very good quality and a great price. from the same quarry as Siga slates apparently. I've posted on here before about them so a quick search should find my previous comments on the subject.

ok, awesome. I'll chat to them on Friday about it all but will just leave it as is for now as I just want to get the manifold plumbed in before I start plaster boarding . happy to visit this subject again after we've lived in the house for a while and if we want finer control. thank you so much for your advice.

ok cool. so, for now, we can just ignore any pumps on the GF manifold and just use the one pump in the basement and see what happens? if we find we're needing different flow temps then we can cross that bridge at that time and re-plumb at the manifolds?

now I've written all of the above I believe I've actually answered your original question. I believe it's 'buffer > pump > manifold with no temp control.

ps. the pump that's in use in the basement was taken from a pump set that I got from Wunda (this one I believe https://www.wundatrade.co.uk/shop/home/underfloor-heating-manifolds-and-pump-sets/premium-pumpsets/premium-pumpset-grundfos-eup-pump-stainless-steel-manifolds/ which was £158 iirc) for the GF manifold. the heating engineers took the pump from that and plumbed it in as shown in the photos above so I now don't have a pump for the GF but I do still have the components that came with the original pump set. if that helps!

these are great questions! to which I don't really know the answer. (sorry!) in our basement UFH the heating engineers set it up like this photo. no blending involved, no wiring centre, and no actuators. and here are our tanks, hot water and buffer: they left a couple of tails going up from the basement manifold which will be taken to the GF manifold. these tails are on the same run of pipes after the current Grundfos pump that's in place which came from Wunda. Here's the GF manifold now, if we ignore the obvious that I should've got a right ended manifold for a second, the pipes will come up through the hole in the floor where the other utilities are coming up and across to the left hand side. would the single pump in the basement be sufficient for both manifolds? would I actually need a second pump for the GF manifold? on the GF we're planning on running it as a single zone but had it designed as 4 zones in case we find we need to split the heating up. that's a pump set, right? are the blending valves, thermometers etc required for a single zone system? as said above we don't have that in the basement but if it's best to have them then I can ask the heating guys to install a pump set.

this Friday our heating engineers are coming to connect our GF ufh manifold up. I need to buy a pump! what size, make, model pump would people recommend for the following loops and flow rates (taken from our design by Wunda) is there an easy way to calculate the required pump size or is it something that you just learn with experience?

i will be using metal for our drop ceiling, just not going for the office grid shaped look is all. 😉

the wife has found tiles she likes from porcelain superstore. I did a search on here but didn't find any results for them. has anyone had any experience buying tiles from them?

+1 and is what I was getting at when I said do all the lights need dimming! the other great thing about centralised lighting automation is you don't have to have everything dimming on day 1! live with the lighting for a bit and if you feel that something is missing or needs dimming then you can just add that circuit to the dimmer module and suddenly you have dimming where you didn't before. 🙂

Do you really need to dim all those lights?

As if

👊 😢 but it's so slow Can't afford those, it's Erbauer for me all the way.

will also probably be a lot cheaper to replace the blocks that to go for VIPs!! also VIPs are made to specific dimensions, can't be cut/trimmed and run a high risk of being damaged and then made useless.

on the same-ish topic as shower formers, I need to cut out the 22mm chipboard flooring to fit the former. 2 of the sides of the former will be against a wall. is there a circular saw that allows cuts close to the wall? I have a multi-tool but it's slow and (in my hands) inaccurate so I was wondering if I could use a circular saw set to the 22mm depth of the chipboard. only issue is that my circular saw has a massive gap between the blade and the edge of the saw so I can't cut close to the wall. what do the professionals use in this instance?

so Impey do a 1500mm x 800mm former. I've decided to get that and cut it down to fit the 1400mm gap. then I don't have to worry about what tiles are chosen!

£11.28 from Wickes https://www.wickes.co.uk/Knauf-Plasterboard-Square-Edge---12-5mm-x-1-2m-x-2-4m/p/104123

£8.40 standard 12.5mm was the last quote I had. Maybe prices are starting to come down. I will check out Wickes to compare

it's a tough call this one as i'm trying to reduce sound transmission from bedrooms upstairs and they will have engineered wood flooring. so an underlay of sorts will help reduce impact noise transmission but won't give as solid a feel. it's kind of a rock and a hard place scenario!

we used Roofshield. that web page has examples of what i'm talking about. 🙂