Brands of pipe

[Lin]

My potential plumber  has quoted to do the lot includeing all the underfloor heating. I asked him what pipe he proposed and he said 'John Guest'.

 

Any comments about this brand? Or what may be a better option or are they all about the same ? their guarantee is 'only' 25 years. he says it's quality gear. The lay flat video shows that it is very easy to lay ... maybe that is why he is so keen?

Edited April 5, 2018 by Lin

[PeterW]

Pipe is pipe - ask him what manifolds he is planning to use as thats the killer question. 

 

Most of the newer pipe lays flat anyway -JG is a bit pricey but the off cuts can be used for plumbing afterwards unlike the 16mm standard PEX stuff that needs converters. 

[Lin]

Thanks for your reply Peter

 

As the pipe cannot be easily replaced once under a screed and will be there for a very long time, it does concern me more.

He will use John Guest manifold

[8ball]

A general builder just across the street from me has just installed JG pipe in his own house for underfloor heating, hes been in the trade for years and really knows his stuff. The house is not a flip he plans to stay for years so I should think he wanted the best for the UFH.

 

I ended up using JG for heating and water and have had no problems at all.

 

If I see him over the weekend I'll ask what manifolds he used.

[Alexphd1]

I have went the other way, a cheap manifold with a grundfos pump and branded pipe. Not a big fan on JG speed fit, prefer the old grey hep2o stuff for plumbing, not used either for a few years. We have used 12/16 & 20mm uponor mlcp for our build. 

 

[Triassic]

I am going in the opposite direction, cheap ebay Pex  pipe £45 per 100m, after all it’s buried in concrete and is protected, so is very likely to leak.

Edited April 7, 2018 by Triassic

[Onoff]

  On 07/04/2018 at 07:11, Triassic said:

I am going in the opposite direction, cheap ebay Pex  pipe £45 per 100m, after all it’s buried in concrete and is protected, so is very likely to leak.

Expand  

 

Likely?

[Nickfromwales]

  On 07/04/2018 at 07:11, Triassic said:

after all it’s buried in concrete and is protected, so is very likely to leak.

Expand  

Lol . 

[Nickfromwales]

  On 05/04/2018 at 22:07, Lin said:

My potential plumber  has quoted to do the lot includeing all the underfloor heating. I asked him what pipe he proposed and he said 'John Guest'.

 

Any comments about this brand? Or what may be a better option or are they all about the same ? their guarantee is 'only' 25 years. he says it's quality gear. The lay flat video shows that it is very easy to lay ... maybe that is why he is so keen?

Expand  

What insulation and thickness?

What screed / concrete and thickness?

Heat source?

Hold off choosing the manifold because it's going to be decided by the floor construction and heat source / type  ( not by your plumber ) 

[Triassic]

  On 07/04/2018 at 07:11, Triassic said:

I am going in the opposite direction, cheap ebay Pex  pipe £45 per 100m, after all it’s buried in concrete and is protected, so is very likely to leak.

Expand  

Woops, I meant to say unlikely to leak !!

[Nickfromwales]

  On 07/04/2018 at 16:27, Triassic said:

Woops, I meant to say unlikely to leak !!

Expand  

That one is staying . 

[Triassic]

  On 07/04/2018 at 07:29, Nickfromwales said:

Hold off choosing the manifold because it's going to be decided by the floor construction and heat source / type  ( not by your plumber ) 

Expand  

Could you expand on this as I need to buy my manifold.

 

My floor is concrete and the heat source is a thermal store and ASHP. 

[Nickfromwales]

You'll be better off with a capillary probe / blending type then, rather than a traditional  TMV. 

Check out the  Ivar Dualmix for eg. 

[Lin]

  On 07/04/2018 at 07:29, Nickfromwales said:

What insulation and thickness?

What screed / concrete and thickness?

Heat source?

Hold off choosing the manifold because it's going to be decided by the floor construction and heat source / type  ( not by your plumber ) 

Expand  

75mm PIR (limited headroom)

Prob liquid 45 to 75mm, as current floor is sloping

Gas

 

[PeterW]

  On 06/04/2018 at 08:29, Lin said:

Thanks for your reply Peter

 

As the pipe cannot be easily replaced once under a screed and will be there for a very long time, it does concern me more.

He will use John Guest manifold

Expand  

 

There are better and cheaper options ..!

 

 I would go Pert/PEX and the Ivar manifold as per the recommendation from @Nickfromwales or a full set from Wunda Trade 

[Nickfromwales]

  On 07/04/2018 at 21:14, Lin said:

75mm PIR (limited headroom)

Prob liquid 45 to 75mm, as current floor is sloping

Gas

 

Expand  

You'll need a buffer tank. 

You'll also need a manifold that does not rely on a cool / cold return to blend the UFH flow temp.  

See my last for the type of manifold you'll need.    

Choose your controls VERY wisely as you'll  need a narrow hysteresis to regulate heat output with a thinner screed / slab, otherwise you'll be going hot / cool / hot / cool.....instead of staying 'warm'. 

[Lin]

I can't see buffer tank on the quote ...how big are they ??

 

There is something called an automatic bypass, and also manifold and on another page; "install manifold and control system under boiler location" which could mean anything

[Lin]

  On 07/04/2018 at 16:27, Triassic said:

Woops, I meant to say unlikely to leak !!

Expand  

 

I have a distrust for pipe because in the past it has had a bad rep as it degraded over time and did leak for some people.

 

It didn't like getting too hot, also certain metals it did not like .... either copper or iron ... i can't remember now. Nick will know

[Nickfromwales]

  On 07/04/2018 at 21:42, Lin said:

 

I have a distrust for pipe because in the past it has had a bad rep as it degraded over time and did leak for some people.

 

It didn't like getting too hot, also certain metals it did not like .... either copper or iron ... i can't remember now. Nick will know

Expand  

I know little or nowt. Mostly nowt, occasionally a bit. Sometimes the bit is relevant to nowt and has little use. 

Apart from that, I'm your man. 

[Nickfromwales]

  On 07/04/2018 at 21:42, Lin said:

 ... i can't remember now. Nick will know

Expand  

I know little or nowt. Mostly nowt, occasionally a bit. Sometimes the bit is relevant to nowt and has little use. 

Apart from that, I'm your go to guy.  

[PeterW]

  On 07/04/2018 at 23:07, Nickfromwales said:

I know little or nowt. Mostly nowt, occasionally a bit. Sometimes the bit is relevant to nowt and has little use. 

Apart from that, I'm your go to guy.  

Expand  

 

I can vouch for his first statement ....