September 4, 20251 yr Dont know about Bristol, but sunny Hertfordshire has had plenty of rain. What's the update fella ?
September 4, 20251 yr Author 1 hour ago, Big Jimbo said: Dont know about Bristol, but sunny Hertfordshire has had plenty of rain. What's the update fella ? Plenty of rain last night for sure . Didn’t witness it . But bone dry 😀
September 4, 20251 yr 4 hours ago, Pocster said: Plenty of rain last night for sure . Didn’t witness it . But bone dry 😀 But how dry was the bone? 🤔
September 7, 20251 yr Author Storm just now . Pissed down biblical style . Gods final test for me . We have good news and bad …. Water running over the slab I.e the pig leak - seems good ; no leak. Both front upstands leak . This are really low to the roof - not 30cm as recommended but like 3cm worst case . But it’s over the upstands so the seal between roof and window frame . Best to take windows up and refit I think ; tons of structural silicone then smack ‘em down . Clearly this job needs to wait until next summer 😊. SWMBO wanted this room beneath when all the leaks finished , but obviously that can’t happen . What’s another year of stalling !?
September 7, 20251 yr Author Strange isn’t it . Had a tiny leak here about 2 yrs ago over the upstand . Bit of expanding foam all golden . Suddenly today …. Still could be worse ! That corner is lowest of them all . So I guess if any are going to leak from the tiniest of holes it would be this one . Rains probably right up to the glass externally ( I can’t see it as decking masks it ) . Edited September 7, 20251 yr by Pocster
September 7, 20251 yr Author This thread continues; though if admin could change the title to “ not THAT leak , this leak “ 😂
September 7, 20251 yr 6 hours ago, Pocster said: “ not THAT leak , this leek “ Not funny anymore, just like this one.
September 8, 20251 yr Author 12 hours ago, Onoff said: Why not apply damp proof stuff to the inside faces? Because that’s bodging 🥹
September 8, 20251 yr Author 18 hours ago, Onoff said: Why not apply damp proof stuff to the inside faces? Actually I like this idea more ! I.e less work ! So the upstands are a mix of timber and structural silicon at the top where the frame sits on . So I need something pretty thick and sticky to coat that with . Needs to get in all the gaps . What should I use ?
September 8, 20251 yr 4 hours ago, Pocster said: Actually I like this idea more ! I.e less work ! So the upstands are a mix of timber and structural silicon at the top where the frame sits on . So I need something pretty thick and sticky to coat that with . Needs to get in all the gaps . What should I use ? All joking aside, how about a wet room tanking kit? Tape the corners & between the different substrates then paint on the flexible tanking slurry.
September 8, 20251 yr Author 12 minutes ago, Onoff said: All joking aside, how about a wet room tanking kit? Tape the corners & between the different substrates then paint on the flexible tanking slurry. Yeah could work 👍
September 8, 20251 yr Author 4 minutes ago, SteamyTea said: What do you mean by that? Is silicon recommended by the glazing firm to bond glass to frame and frame to upstand . Think it was called ssg4000 ultra glaze or something Edited September 8, 20251 yr by Pocster
September 8, 20251 yr 4 minutes ago, Pocster said: ssg4000 ultra glaze That is just an ordinary silicone sealant, it is the frame and glazing that are structural. I suspect it is a high modulus sealant (don't move much in service), similar to what I used to stick the steam rooms together with.
September 8, 20251 yr Author 1 hour ago, SteamyTea said: That is just an ordinary silicone sealant, it is the frame and glazing that are structural. I suspect it is a high modulus sealant (don't move much in service), similar to what I used to stick the steam rooms together with. Just what the company suggested to use
September 8, 20251 yr Author Decision made . Will take them out next summer . Bitumen paint asphalt joints around them . Structural silicone them back in . Delays the job by a year so that’s a win 👍
September 8, 20251 yr Got a pic from above that roof light? Meanwhile throw some more money at it: https://www.maxam.co.uk/maintain-your-property/seek-n-seal/
September 8, 20251 yr Ive heard that works well, @Onoff The glass at the top must have an overhang ? A liberal coat or two of aquaseal or similar on the upstand right up and lapping the glass underside of the overhang.
September 8, 20251 yr That water is coming down the inside of the wood, so right from under the glass. Your posh, fixing the glass down, silicon is letting water by buddy.
September 8, 20251 yr Where's it coming from again? Under the glass, top of the brick or top of the slab?
September 8, 20251 yr Before you rip up the glazing buy some of this and go around the glass to silicone joint. https://www.grime-x.co.uk/product/grime-x-seek-n-seal-windscreen-sealer-sealant-liquid-rubber-silicone-repair/178 Or this: https://www.amazon.co.uk/Captain-Tolleys-Creeping-Crack-sealer/dp/B003T6EJ9A If only for the name! Edited September 8, 20251 yr by Onoff
September 9, 20251 yr Author 10 hours ago, Onoff said: Where's it coming from again? Under the glass, top of the brick or top of the slab? Not 1 or 2 - that was the original problem !! So 3 directly where glazing frame sits on asphalt roof .
Create an account or sign in to comment