Pocster Posted Tuesday at 15:49 Author Posted Tuesday at 15:49 1 hour ago, Pocster said: ??? Idiot diagram please Do you mean like a barrier on the asphalt ?
Pocster Posted Wednesday at 11:52 Author Posted Wednesday at 11:52 Was touch clammy on the leak spots this morning . So decided to tip carefully 2 watering cans of water over just the roof seams . Hour later no evidence of a drip . Hosed just the bottom 25cm of the render - so testing that stone joint and the roof seams again . Hour later no evidence of additional water ingress …. Going to try hosing the entire corner but not over the coping stone . Potentially as the coping stone is twice weathered water could run off in both directions .
Pocster Posted Wednesday at 13:51 Author Posted Wednesday at 13:51 Zero water ingress as far as I can tell . So … need to look at that coping stone - the other side !
Pocster Posted Wednesday at 14:01 Author Posted Wednesday at 14:01 Hmmmmm Some gaps . So I guess in theory when I hose the wall and coping stone it could run down this side - track under pass the drip channel . There are gaps - so will mix some cement and fill them
Pocster Posted Wednesday at 14:02 Author Posted Wednesday at 14:02 Really want a better way to finish that edge - some form of flashing ???
Onoff Posted Wednesday at 17:16 Posted Wednesday at 17:16 3 hours ago, Pocster said: Really want a better way to finish that edge - some form of flashing ??? & it'll all disappear into the shadows.
Pocster Posted 22 hours ago Author Posted 22 hours ago (edited) Bone dry today as expected inside . Just hosed the entire corner making sure it spills over the coping stone . Will wait 10 mins . Check inside . If dry will repeat . Edited 22 hours ago by Pocster
Pocster Posted 22 hours ago Author Posted 22 hours ago Was dry so repeated the soaking . Problem is just sweat on my fingers makes it tricky ! Will check inside in 10 mins
Big Jimbo Posted 18 hours ago Posted 18 hours ago Stick your hand in a bag of flour. Shake off, then stick your finger in the hole. The flour will pick up any moisture and show easily. 1
Pocster Posted 18 hours ago Author Posted 18 hours ago 26 minutes ago, Big Jimbo said: Stick your hand in a bag of flour. Shake off, then stick your finger in the hole. The flour will pick up any moisture and show easily. So many jokes there …. 1
marshian Posted 18 hours ago Posted 18 hours ago 23 minutes ago, Pocster said: So many jokes there …. Just the one I remember - I'm sure it involved talc rather than flour 2
SteamyTea Posted 2 hours ago Posted 2 hours ago 14 hours ago, Big Jimbo said: Yeah, but it does work.....As does the talc. Does it work with Vim, or cocaine?
Big Jimbo Posted 1 hour ago Posted 1 hour ago @SteamyTea I think that Vim might be a bit gritty, and if you have a bag of cocaine big enough to stick your hand in, it's doubtful that you care about trying to find a small leak. Although depending on your supply, the cocaine could well have quite a high content of Vim in it anyway. 1
Pocster Posted 7 minutes ago Author Posted 7 minutes ago Hosed the corner this morning. Made the tinniest damp area appear . So small it didn’t even form a droplet of water . So a bit more investigation required .
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now