Jump to content

Walk on glazing - drip , drip ( yes I know ! )


Recommended Posts

Ok - stop laughing that’s the 1st thing .

The ongoing saga continues- due to the storm etc has got a bit worse understandably.

So the glazing does not leak . I believe water is getting in outside the plot running down the wall and getting in over the concrete slab . If you look closely at the glazing you can see water comes in only above the concrete I.e dry as a bone above this . 
 

I need to ( one day ! ) dig up the lane side outside that wall and try and fine any gaps -fill with cement .

 

But of course - that’s not a guaranteed fix . So in reality I think I need a 2nd ceiling ( above tiles - below cables ) with the sole purpose of directing water towards the edge ( dimpled membrane on wall leading to perimeter drain ) 

Take any suggestions how to do this ! . My 1st issue is how to make a ‘tray’ that sits around the base of the Lightwells and directs water into a ‘ceiling ‘ membrane .

Obviously once I think I have a solution I’ll empty the room , take down the tiled ceiling . So I’m thinking of a simple ‘wedge’ structure . The membrane sits in this ; and as it has a fall directs water to the outer wall .

Its what I do around the sky lights that’s got me a bit stuck .

Photos for amusement of current sky light leaks 

 

 

IMG_0927.jpeg

IMG_0928.jpeg

  • Sad 1
Link to comment
Share on other sites

The 2nd photo is a sky light just outside the electrics cabinet . New line of water tracking in its direction !!! . So I wedged some membrane up with a fall to at least direct any drops outside the electrics room ….

IMG_0930.jpeg

IMG_0931.jpeg

  • Sad 1
Link to comment
Share on other sites

Really difficult to suggest a solution but might a little dam of silicone bead to stop the water tracking where you don’t want it then it should drip into a container or somewhere it won’t cause trouble. 

emoji was not meant to be sad but “what the feck do you do?”

Edited by joe90
  • Thanks 1
Link to comment
Share on other sites

2 minutes ago, joe90 said:

Really difficult to suggest a solution but might a little dam of silicone bead to stop the water tracking where you don’t want it then it should drip into a container or somewhere it won’t cause trouble. 

emoji was not meant to be sad but “what the feck do you do?”

Yeah I have in strategic spots where maybe a water track line crosses a pipe - put a zip tie on it to help limit it . Seems to work sometimes.

It’s the Lightwells I’m unsure what to do with . Need to have water drip into some kind of channel around them that direct the water into a membrane . Not an easy thing …

Link to comment
Share on other sites

I made some small guttering for a little outhouse here made from 32mm drainage pipe cut in half and glue gunned together, or a funnel glued there with a pipe attached 🤷‍♂️

  • Like 1
Link to comment
Share on other sites

Just now, SteamyTea said:

How about some pictures of the outside.

So here’s the wall which I’m 100% certain is the issue . Leak is somewhere below the base of it I.e concrete slab below there . But even when I dig that up - fill what I can - it’s no guarantee of a fix . 1st glazing unit is approx 1m to the left inside wall .

 

image.jpg

Link to comment
Share on other sites

1 minute ago, joe90 said:

I made some small guttering for a little outhouse here made from 32mm drainage pipe cut in half and glue gunned together, or a funnel glued there with a pipe attached 🤷‍♂️

Yeah I’m thinking that kind of thing . But it’s how I ‘fix’ it to the membrane for a waterproof connection. Think I need to make something under the larger glazing ( easier access ) and simply use the professional approach of trial and error !

Link to comment
Share on other sites

6 minutes ago, joe90 said:

Ground will always be damp, DPC needs to be continuous outside of any concrete. Can you dig up around the skylight and waterproof the outside of any concrete ?

Thats a big “ not possible “ . There was zero dpc in the design . So that wall sits on the edge of the concrete slab . As water runs down it and goes below the ground ; I believe it’s finding gaps ( between slab and wall ) and simply running there . So I do need to dig up that edge in the lane ; presumably just go along and smear cement on the edge I.e down from wall base to over the edge of concrete slab .

Edited by Pocster
Link to comment
Share on other sites

So just to clarify .

Wall sits on edge of slab . I’m certain ‘here’ is the point the waters getting in and then running across the slab until of course it finds an exit - the Lightwell .

 

IMG_0932.jpeg

Link to comment
Share on other sites

26 minutes ago, Kelvin said:

I know you’re sure where it’s coming from but have you proved it to yourself by using a hose on the window side to see if water comes in or not? 

Yes .

Zero leaks if I do that .

Look at photos you can see water line is on concrete slab - none coming through above I.e upstand etc .

Edited by Pocster
Link to comment
Share on other sites

@Pocsteryou can get various products for sealing porous ground, one is called bentonite, it is used for sealing up voids in clay when used to build the sides of a lake if it’s leaking. 
I wonder if you can find something that you can dril a few holes in the ground and pump it in under pressure to find its way to the gaps and cracks. 
just a thought. 

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...