Pocster

SWMBO intended to have a log burner when ( if ever ) we complete the build. Flue's in etc. I have tons of ready to burn dried fire wood. She wanted it for visual effect and of course the heat it generates ( though with UFH it isn't necessary for that ) The log burner was planned many years ago long before climate change became a big thing. The house is designed specifically to be energy efficient and so it feels a bit irresponsible now to stick a log burner in. I could just omit it and accept I wasted cash on the flue etc. What do others feel? - I guess potentially they could be banned? ( log burners ; not members ? )

Lights are mains Cable is on the surface i.e. across a flat roof Intention was just to stick a plug on it as it enters the house and straight into a socket. Consumer unit is modern ( so has at least one of those ? )

What cable do I need? Preferably cheap!. Just to connect to some out door lights . Will be 'hidden' externally i.e. can't be walked on etc. so assume don't need armoured??

Careful you'll start a bidding war...

Bet they would of loved some on walk on glazing on that ship

This might be tricky on my own so as I am crap apprentice I may need SWMBO as my crap apprentice . So to Nick she would be crap,crap apprentice ... Or I could just 'risk' doing it all on my own...

Ffs , yes boss

But you said to do that “ CT1 - thin bead between the seal and the trap, same between seal and tray then do it up and leave 24 hours“ I thought it would be better to stick seal to trap ( let it set ; also can’t move ) then silicone whole lot to tray …

Ok - you’re the boss !. Think I’ll ct1 the rubber ring to the fitting first and let that set

But if it still leaks I’ll never get the (expletive deleted)er out uncle Nick !

Flat - can feel round the edge from above

I’m just worried if I do that and it still leaks I’ll never get it out .( between seal and tray I mean )

Reckon SWMBO might not notice the water …

I have a leak from the ensuite waste . Tested this ages ago all fine . SWMBO has a shower - slight leak . I manage to tighten the trap half a turn - leaks even more !! Can’t see anything obvious. Trap seems good , rubber seal seems good . Underside of tray hole is a bit tight to that timber - but as you can see in photo’s it’s not catching in . Is there perhaps a different / better trap I can use ???

https://ifunny.co/picture/u9KOXawe2

Naughty bitch boy !

Philistines !! ? ?

Confused here ? wine or whine ? ? In our previous property had a cheap beko dishwasher - was fine . But the Bosch is much quieter and has app link up ( sad I know ) …

Got a Bosch ( can dig out the model number ) very quiet . I can swear / drink wine and no one says “ is the dishwasher on “ ….

A sea of Black and Yellow!. HEAVEN!

Eclisse . Right pita to fit and company were assholes also . Looks good though ?

Never a shortage of screws when i pb ?

SWMBO ??

There Steamy (expletive deleted)ing knob bored. I AM THE MAN!

Any suggestions of a material I can use to sound insulate the cupboard it is in?