NSS Posted October 23, 2018 Share Posted October 23, 2018 We have a Growmate pyramid greenhouse like the one below. The glazed section lifts and rotates above the base and one section of glass lifts out to allow access to tend the stuff growing inside. Unfortunately, Mrs NSS is no longer able to get down on her knees (or get up again if she does) so I want to raise the whole thing up to a suitable height. That would of course be relatively easy, but I would actually like to make it so the whole thing, base and all, can easily rotate too, thus allowing her to sit in one position and turn it as needed to access each segment. Effectively, it needs to sit on a large 'Lazy Susan', but one which will cope with a total weight of perhaps 150 to 200kgs. Any ideas as to what I could use without having to spend a small fortune? Link to comment Share on other sites More sharing options...
Jeremy Harris Posted October 23, 2018 Share Posted October 23, 2018 Something like this 300mm diameter bearing might do it, supporting a disc of thick ply that would take the greenhouse: https://www.ebay.co.uk/itm/12-Heavy-Duty-Lazy-Susan-Rotating-Swivel-Turntable-Bearing-Hold-30kg-Desk-Table/173292001547?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D1%26asc%3D54618%26meid%3De2dedc85fc4c4534a94a7ab652b63b33%26pid%3D100005%26rk%3D5%26rkt%3D12%26sd%3D222648701219%26itm%3D173292001547&_trksid=p2047675.c100005.m1851 Or, if 30kg isn't a high enough load capacity there are some bigger ones here that will take up to 120kg: https://www.ebay.co.uk/itm/Round-Rotating-Tray-Bearing-Turntable-Turn-Table-Heavy-Duty-Swivel-Plate/142972195351?hash=item2149ce9217:m:m6Ms5uEO8tC4t1STyL9TEaQ:rk:18:pf:0 Link to comment Share on other sites More sharing options...
NSS Posted October 23, 2018 Author Share Posted October 23, 2018 19 minutes ago, JSHarris said: Something like this 300mm diameter bearing might do it, supporting a disc of thick ply that would take the greenhouse: https://www.ebay.co.uk/itm/12-Heavy-Duty-Lazy-Susan-Rotating-Swivel-Turntable-Bearing-Hold-30kg-Desk-Table/173292001547?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D1%26asc%3D54618%26meid%3De2dedc85fc4c4534a94a7ab652b63b33%26pid%3D100005%26rk%3D5%26rkt%3D12%26sd%3D222648701219%26itm%3D173292001547&_trksid=p2047675.c100005.m1851 Or, if 30kg isn't a high enough load capacity there are some bigger ones here that will take up to 120kg: https://www.ebay.co.uk/itm/Round-Rotating-Tray-Bearing-Turntable-Turn-Table-Heavy-Duty-Swivel-Plate/142972195351?hash=item2149ce9217:m:m6Ms5uEO8tC4t1STyL9TEaQ:rk:18:pf:0 Cheers Jeremy, but as mentioned I estimate loading to be 150-200kgs. Link to comment Share on other sites More sharing options...
NSS Posted October 23, 2018 Author Share Posted October 23, 2018 Found this https://www.sdslondon.co.uk/furniture-turntables/turntable-360-degree-450-kg.html?campaign=196461189&content=193655401383&keyword=&gclid=EAIaIQobChMI8syJio2d3gIViLHtCh3HKgbaEAQYAyABEgIq__D_BwE&gclsrc=aw.ds but not sure how durable it would be for outside use. Link to comment Share on other sites More sharing options...
Jeremy Harris Posted October 23, 2018 Share Posted October 23, 2018 Looks ideal, especially with that high load rating. Probably a good idea to liberally grease it when fitting, although it shouldn't get wet under a disc of ply. Just need to make some sort of pedestal to raise the whole thing up to a good working height. Link to comment Share on other sites More sharing options...
Onoff Posted October 23, 2018 Share Posted October 23, 2018 A Roballo slewing bearing is what you want. Let me make some enquiries and see if I can get one off a mate. 1 Link to comment Share on other sites More sharing options...
Russell griffiths Posted October 24, 2018 Share Posted October 24, 2018 I have seen something similar that used large rubber casters, like shopping trolley wheels I have seen them used either rubber side down or rubber up. With a channel track to keep the wheels in position. Link to comment Share on other sites More sharing options...
NSS Posted October 24, 2018 Author Share Posted October 24, 2018 12 hours ago, Onoff said: A Roballo slewing bearing is what you want. Let me make some enquiries and see if I can get one off a mate. Had never heard of a slewing bearing but they look to be a potentially ideal solution ? Link to comment Share on other sites More sharing options...
NSS Posted October 24, 2018 Author Share Posted October 24, 2018 47 minutes ago, Russell griffiths said: I have seen something similar that used large rubber casters, like shopping trolley wheels I have seen them used either rubber side down or rubber up. With a channel track to keep the wheels in position. I did consider this, much like a microwave turntable, but thought it might end up being a bit cumbersome. It needs to be something that will move relatively freely or Mrs NSS simply won't be able to turn it from a seated position. Link to comment Share on other sites More sharing options...
dpmiller Posted October 24, 2018 Share Posted October 24, 2018 with the kind of weight you're talking about, will she be able to able to get the thing to start moving, even on a near-frictionless bearing? Link to comment Share on other sites More sharing options...
Onoff Posted October 24, 2018 Share Posted October 24, 2018 27 minutes ago, NSS said: Had never heard of a slewing bearing but they look to be a potentially ideal solution ? Not cheap. Trying a few old mates to see if they have one. About 18" - 2 ' diameter the ones I'm thinking of. There are fabricated versions using a central, bearinged shaft etc. This maybe: https://www.slhardwoods.co.uk/products/tools-and-accessories/accessories/turntable-360-450kg-capacity You'd still need "outrigger" casters at the near edge of the structure. Link to comment Share on other sites More sharing options...
ProDave Posted October 24, 2018 Share Posted October 24, 2018 Why not just get a bigger, "proper" walk in greenhouse? Yes I know, less fun. Link to comment Share on other sites More sharing options...
NSS Posted October 24, 2018 Author Share Posted October 24, 2018 16 minutes ago, ProDave said: Why not just get a bigger, "proper" walk in greenhouse? Yes I know, less fun. We have one of those too Link to comment Share on other sites More sharing options...
NSS Posted October 24, 2018 Author Share Posted October 24, 2018 2 hours ago, Onoff said: Not cheap. Trying a few old mates to see if they have one. About 18" - 2 ' diameter the ones I'm thinking of. There are fabricated versions using a central, bearinged shaft etc. This maybe: https://www.slhardwoods.co.uk/products/tools-and-accessories/accessories/turntable-360-450kg-capacity You'd still need "outrigger" casters at the near edge of the structure. Yep, 18-24" would be ideal. I've also found these https://nbcgroup.co.uk/products/trailer-rings/trailer-rings-series-u but suspect they may be more difficult to turn. The other option with, as you suggest, outrigger casters is definitely another option ? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now