Gate Pillars

[Onoff]

1 minute ago, pocster said:

I (expletive deleted)ing sort the bathroom ufh this year ( again ) 

 

Well I'm certainly not in a hurry to get the 9kW body dryer going now!

[Pocster]

2 minutes ago, Onoff said:

 

Well I'm certainly not in a hurry to get the 9kW body dryer going now!

Oh (expletive deleted) . I forgot about that . It was pre brexit / decimalisation wasn’t it ?

[MikeSharp01]

1 hour ago, pocster said:

Admin please ; for the first time in earths history…..  amend  @Onoff ‘s title to “ completed “

WHAT!

[Big Jimbo]

13 hours ago, Onoff said:

A video of the gates finally working albeit off a temporary fly lead as aforementioned:

 https://flic.kr/p/2nJMkws

 

 

All working but for a pita with a board output that doesn't seem to be working!

Anyone else got Chamberlain Liftmaster kit with a CB22 pcb? @Big Jimbo?

 

Sorry On Off. Mine is some Italian thing branded as Oxogen. Gate is looking great.

[Onoff]

Gate related!

 

Finally gotten around to running the gate wiring around the garage in some 50x50, galvanised, rat proof trunking. Even that's been a mission. Clearing stacked shelves to get access then the plugs wouldn't take in the lightweight blocks as so close to a joint. Resin anchors to the rescue!

 

There's an SWA in there plus 2 20mm flexible conduits for comms, cameras etc to the gate. 

 

 

 

Got to shift a big, fully stacked shelf shortly to drill the floor slab again for a new incoming, underground supply. That and fit a new cu in there. 

[Pocster]

Go for it @Onoff - you are now on a roll …. Since 2018 👍👍👍👍

[Onoff]

1 hour ago, Pocster said:

you are now on a roll

 

Like toilet paper!

[SteamyTea]

2 hours ago, Onoff said:

Like toilet paper

It is alright, not as good as a rabbit, as Bear said to Rabbit.

[Onoff]

Got to repeat this the opposite of the garage now! That killed two SDS drills, a couple of 1m bits and nigh on me! 

 

 

 

Edited August 15, 2023 by Onoff

[Big Jimbo]

Well done. That is a hell of a task.

[Onoff]

41 minutes ago, Big Jimbo said:

Well done. That is a hell of a task.

 

Did that one 3 years ago this month. Took me days! 

[SteamyTea]

10 minutes ago, Onoff said:

Did that one 3 years ago this month. Took me days

That will be 1096 days then.

[Onoff]

Believe it or not it all works, like via a remote key fob! Of course there's peripheral bits to finish off...

 

Need to come up with a plan for doing the sloping bit of the drive now. How deep a sub base, sub base of what, how to edge by the road, sleepers on edge up the sides maybe? Then block pave, concrete, tarmac etc etc?

 

 

[Pocster]

27 minutes ago, Onoff said:

Believe it or not it all works, like via a remote key fob! Of course there's peripheral bits to finish off...

 

Need to come up with a plan for doing the sloping bit of the drive now. How deep a sub base, sub base of what, how to edge by the road, sleepers on edge up the sides maybe? Then block pave, concrete, tarmac etc etc?

 

 

About fecking time 👍🥳🤣

[joe90]

23 minutes ago, Pocster said:

About fecking time 👍🥳🤣

Pot and kettle springs to mind here 🤷‍♂️Looking good mate.

Edited October 29, 2024 by joe90

[Onoff]

11 minutes ago, Pocster said:

About fecking time 👍🥳🤣

 

I don't think decking would be any good as a driveway surface.