BotusBuild Posted Thursday at 20:35 Author Posted Thursday at 20:35 I was thinking 2 x 45's, but then how to get that waste in is the issue, which I haven't figured out a solution yet apart from cut and glue (NO!)
Nickfromwales Posted Thursday at 20:44 Posted Thursday at 20:44 8 minutes ago, BotusBuild said: I was thinking 2 x 45's, but then how to get that waste in is the issue, which I haven't figured out a solution yet apart from cut and glue (NO!) Just change the branch! You'll still pick the waste up exactly the same way.
Gone West Posted Friday at 07:01 Posted Friday at 07:01 10 hours ago, Nickfromwales said: My only issue is, that is a T branch, and should be a Y branch like the other if poop is dropping into it from "Le Bog". That's interesting, what is the reasoning behind having to use a Y instead of a swept T in that position.
BotusBuild Posted Friday at 11:07 Author Posted Friday at 11:07 (edited) 14 hours ago, Nickfromwales said: Just change the branch! You'll still pick the waste up exactly the same way. Done. Frame time Edited Friday at 11:10 by BotusBuild 1
BotusBuild Posted Friday at 11:39 Author Posted Friday at 11:39 I've started a topic HERE to cover GROHE frame install for others to reference. 1
Nickfromwales Posted Friday at 12:01 Posted Friday at 12:01 53 minutes ago, BotusBuild said: Done. Frame time “By Jove, I think he’s got it!” 🤝👍 1 1
Nickfromwales Posted Friday at 12:30 Posted Friday at 12:30 5 hours ago, Gone West said: That's interesting, what is the reasoning behind having to use a Y instead of a swept T in that position. There’s not enough sweep, and there would be a lot of ‘matter’ going to the right as well as flowing away to the left. If a T is laid horizontally with a good fall then you can get away with it (just), but I avoid using them tbh. Not such a worry if theres a flushing WC upstream, but here there’s just a 40mm waste which isn't sufficient to ‘move things along’ (if there are any stragglers ). 1
BotusBuild Posted Friday at 15:23 Author Posted Friday at 15:23 2 hours ago, Nickfromwales said: 40mm waste which isn't sufficient to ‘move things along’ (if there are any stragglers ). Not even if it a full flowing shower 😀 (statement, not question)
BotusBuild Posted Friday at 17:19 Author Posted Friday at 17:19 Here is the frame fitted Better explanation of the Grohe instructions HERE that I took to fit to this stage. That topic will be updated with the extra steps still required. 1
Nickfromwales Posted Friday at 19:12 Posted Friday at 19:12 1 hour ago, BotusBuild said: Here is the frame fitted Better explanation of the Grohe instructions HERE that I took to fit to this stage. That topic will be updated with the extra steps still required. Tres bien, Rodders. @Gone West, you can see the difference in the two branches, with the above being so much better for 'flow'.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now