RichyB2024 Posted November 5 Share Posted November 5 Hello I recently purchased a Bosch GET-150 turbo sander which I am very happy with. Bosch recommended the GAS 35 M for extraction as it has the correct connector, however it is £600 and some of the reviews say it has poor suction after a short amount of use. My question is: does anyone have experience with this sander and connecting it to different types of extractors. I have a V-TUF M class which is pretty solid and I was thinking I could just buy the Bosch hose and connect it that way. I’m not against paying £400-£500 for the right machine though, so if a Festool or Mirka extractor can be adapted to fit my Bosch sander I would definitely consider it. Cheers Rich Link to comment Share on other sites More sharing options...
Onoff Posted November 5 Share Posted November 5 https://www.amazon.co.uk/Cen-Tec-Systems-Extraction-Compatible-Milwaukee/dp/B084DGYSJW/ref=asc_df_B084DGYSJW/? Link to comment Share on other sites More sharing options...
Mike Posted November 5 Share Posted November 5 If you'll be making lots of dust, it may also be worth putting a cyclone separator (eg https://www.amazon.co.uk/VEVOR-Separator-Retrofit-Collectors-Connector/dp/B0DBYZH4V) between the sander and the vacuum to save on filters & vacuum bags. Link to comment Share on other sites More sharing options...
RichyB2024 Posted November 5 Author Share Posted November 5 2 hours ago, Onoff said: https://www.amazon.co.uk/Cen-Tec-Systems-Extraction-Compatible-Milwaukee/dp/B084DGYSJW/ref=asc_df_B084DGYSJW/? thanks for this. I have looked at this before but didn’t realise they were Bosch compatible any idea what extractor it’s compatible with for the other end? E.g. festool, mirka etc. Link to comment Share on other sites More sharing options...
Onoff Posted November 5 Share Posted November 5 9 minutes ago, RichyB2024 said: thanks for this. I have looked at this before but didn’t realise they were Bosch compatible any idea what extractor it’s compatible with for the other end? E.g. festool, mirka etc. No idea, sorry. I just get my lad to 3D print adapters. Item page says this: "Adaptor set is only compatible with 32mm threaded crush proof hose, common with domestic home vacuums and many fine dust extraction vacuums" Link to comment Share on other sites More sharing options...
RichyB2024 Posted November 8 Author Share Posted November 8 (edited) So I went with Trend T33A M class and Cen-etc adaptors. Will update when I’ve tested it all. Edited November 8 by RichyB2024 Link to comment Share on other sites More sharing options...
RichyB2024 Posted November 12 Author Share Posted November 12 Initial test is extremely positive. Comes with rubber adaptor for power tools so cen-tec adaptors not required. Good suction even through the (cheap) 5m hose supplies. The auto-start is an excellent feature. Why anyone would pay 3x more I don’t know Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now