Levelling system - using over multiple days?

[NeilScotland]

HI all, 

I have a Rubi Delta levelling system for my 100 x 100cm floor tiles. 

How do I set it up so that I can come back and lay next to dry tiles with fresh tiles in the coming days (I.e. the tiles that I need to cut will not be done the same day as the full tiles go down).

 

Do I just add the floor clips to the edge of the tile where I finish, and then when I come back the following day(s) just adhesive over the top of the (bottom of) the clip, and then when levelling, the fresh tile will level with the previously laid (and dry) tile?

 

thanks  from a newbie. 

Neil 

[wozza]

We used the Perfect Level Master system for our 120 x 120cm tiles.

 

Where we left an unfinished tile edge, we either put a clip in place with a small offcut of tile to support it, or we put the clip in loose.

 

 

 

[Gav_P]

19 minutes ago, wozza said:

120 x 120cm tiles.

Crikey!! Whoppers! I like big ones... got any pics? ?

[wozza]

5 minutes ago, Gav_P said:

Crikey!! Whoppers! I like big ones... got any pics? ?

 

[nod]

1 hour ago, NeilScotland said:

HI all, 

I have a Rubi Delta levelling system for my 100 x 100cm floor tiles. 

How do I set it up so that I can come back and lay next to dry tiles with fresh tiles in the coming days (I.e. the tiles that I need to cut will not be done the same day as the full tiles go down).

 

Do I just add the floor clips to the edge of the tile where I finish, and then when I come back the following day(s) just adhesive over the top of the (bottom of) the clip, and then when levelling, the fresh tile will level with the previously laid (and dry) tile?

 

thanks  from a newbie. 

Neil 

If you are still wanting to get a tight bed It won’t really matter what you use 

[Gav_P]

12 minutes ago, wozza said:

 

Nice... you don’t realise the size of the room until you know the tiles are 1.2m each! 

[NeilScotland]

1 hour ago, wozza said:

 

woz a; those are stunning. Very similar to ours...... dog was supervising. 

 

We have the same tiles outside the doors. the doors slide to open a 3.4m space. So have lined up the edges to match. 

 

 

 

[Oz07]

See dulux have sent their rep out

[NeilScotland]

1 hour ago, Oz07 said:

See dulux have sent their rep out

 haha. she’s checking out the paintwork

 

[wozza]

@NeilScotland   Did you consider using a decoupling matt?

 

Please post a pic when finished.

Edited December 12, 2020 by wozza

[NeilScotland]

58 minutes ago, wozza said:

@NeilScotland   Did you consider using a decoupling matt?

 

Please post a pic when finished.

I did. but there isn’t enough space with tile. back butter. adhesive layer and then the door edge...... 

[Pocster]

20 hours ago, wozza said:

We used the Perfect Level Master system for our 120 x 120cm tiles.

 

Where we left an unfinished tile edge, we either put a clip in place with a small offcut of tile to support it, or we put the clip in loose.

 

 

 

I put the clip ready for the next day .