Dave Jones Posted November 1, 2020 Share Posted November 1, 2020 I really like the idea of no architrve/skirting in some rooms, how practiaclly is this done as plastered walls need to meet the door liners and this transition is what the archi hides ? Link to comment Share on other sites More sharing options...
nod Posted November 1, 2020 Share Posted November 1, 2020 It’s is quite practical and gives a very sharp finish for not a lot of money I’ve done this on a few houses and carried the detail 15 mil above the skirting Quite common on offices Coffee shops etc Simply use a stop end edge bead that taps onto the end of the plasterboards Link to comment Share on other sites More sharing options...
Dave Jones Posted November 1, 2020 Author Share Posted November 1, 2020 How does that work around door liners ? Link to comment Share on other sites More sharing options...
JamesP Posted November 1, 2020 Share Posted November 1, 2020 9 minutes ago, nod said: It’s is quite practical and gives a very sharp finish for not a lot of money I’ve done this on a few houses and carried the detail 15 mil above the skirting Quite common on offices Coffee shops etc Simply use a stop end edge bead that taps onto the end of the plasterboards Do you just run the stop end bead past the PB across the edge of the door lining or run the PB with stop end across the door lining? Link to comment Share on other sites More sharing options...
nod Posted November 1, 2020 Share Posted November 1, 2020 5 mil onto the casing We normally butt 150x15 ply around the casing and run a bead of acoustic sealer onto the ply Then drive some screws through the pb the following day Partitions Simply double board Just looking to see if I’ve any picks We did a 18000 sq ft house overlooking Lake Windermere 2018 I will post them if I find some 3 1 Link to comment Share on other sites More sharing options...
Moggaman Posted January 8, 2022 Share Posted January 8, 2022 Hi, on this topic , we also want no architrave at doorways . Our doorways are 100mm block. The walls on the outside of each door/ the hall side will be mortar finish whilst the internals of the rooms will have mortar plus skim. how do I achieve this look. I see plasterboard mentioned here but there will be no plasterboard in mine. the only thing I can think of is … set door frames.., mortar to door frames…Then run the skim over the mortar door frame joint to a stop bead at the end..??? Any help appreciated . Link to comment Share on other sites More sharing options...
sean1933 Posted May 15, 2023 Share Posted May 15, 2023 Morning @nod. I don't suppose you ever found any photos of this setup? I'm struggling to visualise the setup and am currently at this stage of my build. We have flush pocket doors and stupidly suggested we do the same on normal doors to match, rather than shadowgaps. I've found a ready-made profile (EzyJamb SRC) but at £500 a pop ( I need 10!l it's rather expensive! Any help much appreciated. On 01/11/2020 at 20:48, nod said: 5 mil onto the casing We normally butt 150x15 ply around the casing and run a bead of acoustic sealer onto the ply Then drive some screws through the pb the following day Partitions Simply double board Just looking to see if I’ve any picks We did a 18000 sq ft house overlooking Lake Windermere 2018 I will post them if I find some Link to comment Share on other sites More sharing options...
markocosic Posted June 18, 2023 Share Posted June 18, 2023 On 01/11/2020 at 22:48, nod said: We normally butt 150x15 ply around the casing and run a bead of acoustic sealer onto the ply Then drive some screws through the pb the following day Partitions Simply double board Do you have a sketch of this in cross section that I could wrap my head around please? Link to comment Share on other sites More sharing options...
markharro Posted December 18, 2023 Share Posted December 18, 2023 On 15/05/2023 at 10:23, sean1933 said: I've found a ready-made profile (EzyJamb SRC) but at £500 a pop ( I need 10!l it's rather expensive! Hi @sean1933 did you use this EzyJamb product? I was considering it as well but didnt realise it was £500 per door kit! Link to comment Share on other sites More sharing options...
sean1933 Posted February 5 Share Posted February 5 On 18/12/2023 at 21:05, markharro said: Hi @sean1933 did you use this EzyJamb product? I was considering it as well but didnt realise it was £500 per door kit! Hi Mark, sorry for the slow reply I didn't see the notification. In short - this is still on the jobs list (for various reasons I had to take some time away from the build) but I wont be going for the EzyJamb product as the price is ridiculous. I planned to trial a custom setup with some plaster in QIC trims - I'm double boarding everywhere so with some ply behind to tie in the door frame to studwork I'd like to think it can be made rigid enough to not crack out - I think this is the principle NOD talked about above but I've struggled to picture his exact proposed setup. Link to comment Share on other sites More sharing options...
markharro Posted February 5 Share Posted February 5 Ah ok. Do you know if there are any similar products to the Ezy-jamb at a more acceptable price point? Link to comment Share on other sites More sharing options...
markharro Posted March 28 Share Posted March 28 How are you getting on with @sean1933 I really need to work out what I am doing with our doors etc. You mentioned teh Ezyjamb was £500 - did that include a door blank? Link to comment Share on other sites More sharing options...
Adsibob Posted March 28 Share Posted March 28 (edited) We did this in our hallway and did half of this in our kids bathroom. Would have preferred not to have any skirting tiles, but with the kids throwing water around in here, felt like that was asking for trouble. You only notice the skirting when you look right down. I will try and post a pic of the hallway wall on the other side of this door, which has no skirting or architrave. Edited March 28 by Adsibob Link to comment Share on other sites More sharing options...
Adsibob Posted March 28 Share Posted March 28 (edited) Will look better once the tiny plinth of wooden floor between the door and the bathroom is stained black to match the framing of the walk on glazing, but this is low down on the “to-do” list… Edited March 28 by Adsibob 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now