Manifold system versus hot return system

[Nickfromwales]

3 hours ago, weslev said:

Thanks for the tips NFW.

🙌

[Thorfun]

1 hour ago, Nickfromwales said:

5 hours ago, weslev said:

Thanks for the tips NFW.

🙌

NSFW more like! 😂

[Nickfromwales]

18 minutes ago, Thorfun said:

NSFW more like! 😂

I know where you live.

 

[sharpener]

On 15/03/2024 at 10:07, JohnMo said:

 

There are two sizes, you just have to watch the head required, the small one is a very low head output.

 

 

Thanks for the heads up. But as you may recall my application is to stir the tank to improve the heat transfer with a small coil. There is 1.05m head at zero flow, and it will do 0.9m^3/hr at zero pressure which should be fine, I don't need it to turn the tank contents over every 20 mins, just keep it moving.

[JohnMo]

49 minutes ago, sharpener said:

 

Thanks for the heads up. But as you may recall my application is to stir the tank to improve the heat transfer with a small coil. There is 1.05m head at zero flow, and it will do 0.9m^3/hr at zero pressure which should be fine, I don't need it to turn the tank contents over every 20 mins, just keep it moving.

Mine, the smallest one copes with 15mm tube for 20m each way, so should have no problem stirring a tank.