Renovation of Ellesmere Bungalow.

Reading that summary, I can only shake my head and wonder what is the great attraction of wireless controls and throwing an "app" into the mixture?

 

Most ordinary systems with hard wired thermostats and hard wired programmers "Just Work"

What heat loss assessments and instructions did they leave?

 

Have you managed to check the daily energy use of it? We're using about 32 to 35kwh a day atm, likely to hit 40kwh during this current cold spell? (whole house so includes cooking, dish washer and washing machine/tumble dryer)

" i discovered it had been set to a particular schedule for those out at work all day - ie on for a couple of house in the morning, low during the day, warmer for the evening and off at night"

 

So the system was not commissioned at all.

 

Do these installers know how to set up heat pump systems.

The people who commission the system and sign off everything for the Government grant are coming next week.  We have instructions for everything except the Digistat!  And the rest of the stuff, we are advised to leave well alone.  Apart from adjusting the radiators.

I agree with the wireless stuff - far better to have a wired system that we can control - with instructions!  I hate Apps and it didnt work from my house so that was a waste of time.  I guess there is some way of connecting it to Mums internet so I can control it remotely and I shall have to find out. 

 

Today Mum rang and told me that while the house was lovely when they got up, it had turned itself down to 16oC - ie, back to the origonal schedule at 8.30am.  Luckily I was able to tell them how to boost the temperature, till I can get there and amend the schedule again.  What a nightmare for them 🙁they can do without these programming issues.

 

 

It is difficult to assess the energy use as it has been on and off since it was installed.  We took the old heating system out on the 7th, leaving them with plug in radiators over the weekend. The system was finished on Friday 15th but we need a few weeks to really see if its helping.  16th may have been the day it heated the whole water tank as that is the biggest use. 

So today I went over to the house and while it wasnt cold, it was not warm either. The Digistat said 18C and I used the App to increase that to 22o while I took Mum to her hairdressers and Waitrose shop.  Having agreed with ProDaves comments, I rang and asked the electrician who did the install to finda simple wired thermostat that Mum and Dad have a chance of being able to use.  He suggested a Nest thing but I said I wanted wired. After a while, he sent details of a Honeywell one, whichis the exact one they had for the old system. Perfect.  I am now waiting for them to say when they will come and move the old one - its still on the wall but as its quite close to a radiator, it will need moving.

They didnt seem keen but I think its the only/best way.

Back at the house, it seemed warmer but still not up to the 22oC.  Also the hot water was only lukewarm 🙁

I changed the actual Digistat to increase the temperature to 21oC all day with 16oC at night. The house is certainly not cold but I dont think it was up to 21oC when i left. We shall see what happens next.

Poor Mum and Dad are so tired of all these problems (as am I) and I do think it would have been much easier to put radiators and a gas boiler in.  Its a shame I have principles and wanted to do the 'right thing'.  😒

 

So obvious question why not Weather Compensation, then who gives a stuff about the thermostat? Your trying to use the ASHP like a boiler, running against the thermostat.

 

A simple timer/cylinder thermostat switches between CH and DHW, because of the stupid way Grant wants to install as S plan.

Edited 14 hours ago by JohnMo